Lethal Z cam, need advice
#1
Lethal Z cam, need advice
Is Lethal Racing out of business ?
I have a Lethal Z cam in a new LS7 crate motor. I've lost contact with Shawn at Ragin Racin , Lethal Racing.
Can I take the car to a dyno tuner, give them all the cam specs, etc. and let them get the motor all tuned up ?
What's the best procedure to get my motor running the right way ??
I have a Lethal Z cam in a new LS7 crate motor. I've lost contact with Shawn at Ragin Racin , Lethal Racing.
Can I take the car to a dyno tuner, give them all the cam specs, etc. and let them get the motor all tuned up ?
What's the best procedure to get my motor running the right way ??
#3
Team Owner
You don't need cam specs to tune it. Your tuner shouldn't need anything.
Last lethal cam I did was a 232/250 113ish and around 640 lift. Doesn't matter from a tuning standpoint.
Last lethal cam I did was a 232/250 113ish and around 640 lift. Doesn't matter from a tuning standpoint.
#4
Race Director
Member Since: May 2004
Location: Raleigh, NC
Posts: 16,664
Received 1,194 Likes
on
1,053 Posts
St. Jude Donor '15
Injection timing wise it's not a bad thing to know, but the chances of most tuners spending time on that is slim to none, so doubt it'll matter, and it'd just be a starting point anyways
Last edited by schpenxel; 07-27-2017 at 08:13 PM.