code scanner selection
Thread Starter
Advanced
Joined: Jun 2011
Posts: 50
Likes: 2
code scanner selection
I have decided to buy an OBD2 scanner or whatever I need to do the following: Check/reset engine codes and also check and evaluate body control codes, ie wheek speed sensors, airbag sensors and such things. I have a little icon of an airbag on my dash near the fuel gauge and I don't know what that means.
Le Mans Master
Joined: Oct 2014
Posts: 8,672
Likes: 2,726
From: Atlanta GA
common problem , run the seat all the way back , disconnect battery , unplugthe yellow connectors under the seat , clean connections with electrical cleaner, plug back in making sure locking tab engages, then use a nylon tie wrapped around both the male and female connections , pull it tight so it keeps connection tight . Rinse and repeat on the passenger side . Light should go out, if not ..... you have airbag issues which I would have someone look at
Dave
Dave
Last edited by Dcasole; Sep 19, 2020 at 05:53 PM.
