When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Did you expect the stock C6 engine to come for such a low price? I did not!
Stock engine of my VW Golf cost almost the same...
Hampi
Wouldn't we just go LS7 if we do something wacky to the engine? Or is there more to it than just putting it in the car and adding a new front fascia for RAM AIR?
Wouldn't we just go LS7 if we do something wacky to the engine? Or is there more to it than just putting it in the car and adding a new front fascia for RAM AIR?
JK
you need to add the dry sump oil system which means moving the battery ETC.
Wouldn't we just go LS7 if we do something wacky to the engine? Or is there more to it than just putting it in the car and adding a new front fascia for RAM AIR?
JK
$5,250 vs. ~$13,000 plus moving things like the battery and installing the dry sump.
I friend of mine was replacing recently his 5.7l Chey boat engine; engine alone was costing him 11k USD
if you run in salt water you will need a heat exchanger to cool the engine because you can not run salt water thru aluminum very long without a problem. the cast iron engines with aluminum intakes and such have the aluminum coated inside to prevent damage. the 11:1 CR of the new 427 is pretty high for a boat engine unless you run racing gas because a boat engine is under full throttle a lot more then a car. we went thru this when we tried to L-88 engines on sunoco 103 octane in boats,the detonation tuliped the valves into the heads
Last edited by clem zahrobsky; Jul 22, 2005 at 08:38 AM.