Switched power source




Last edited by SpinMonster; Dec 16, 2005 at 03:38 AM.
Fuse 9 PT input ETC
Fuse 10 Man Trans Sol
Fuse 12 ODD INJ
Fuse 16 EVEn Inj
Fuse 6 O2Sen
Fuse 14 Emission
I would say fuse 10 is your best bet, it only powers the skip shift solenoid. I would probably stay away from the other ones since they are power supplies for sensors, even though it would probably be ok, you may trigger some kind of DTC, esp with fuse 9. Even though it should be switched, I'd double check it with a mutlmeter, should be easy
Just make sure your new device won't draw too much power since you've got that underdrive pulley......j/k.....




Thanks for answering as you see not many tuners that install shift lights/window switches are quick to tell you such things when it doesn't find a buck.



