I have worked on a lot of older corvettes but this is the first time I am pulling the intake off my C6 does anyone have any instructions, how do you get the fuel line apart? it looks like it takes a special tool? Also does the replacement need to be tightened down any special way.
Thanks I feel a little dumb about this one!

 

Do a search there are a couple of threads on this with good write ups. I did mine and it is easy.

 

you don't need to discount the fuel line if you want to take the intake off.

 

Thanks1 I found it on LS1HOWTO.COM, I am sure the LS2 would be the same!

 

http://forums.corvetteforum.com/show....php?t=1434941

http://forums.corvetteforum.com/show...intake+install

 

I am literally minutes away from posting a "how-to" on my website.

I'll link it shortly.

 

You can get a good idea here...

http://www.ls2portworks.com/Installation.html


The next local Vette I do will fill in the Vette specific missing pics!

 

Very nice writeup and great pics!

 

Thanks for all the input, I am changing the intake with one fron LS2 port works , Cory seems like a great guy and he just Emailed me this proceedure, We will see what happenes this weekend. so far with headers, CAI, GHL exhaust, 160 thermo, and a custom tune from the good guys at 21 century musclecars we are at 378 hp. This weekend the intake and next month a cam and under drive pullys I hope to see somewhere around 415-420 hp

 

Darn good write up so far. I would almost try it myself with that instruction page.

 

Treadhead on the LS2GTO.com forum gave a lot of that info that was GTO specific and many of the pics. I've only done 1 GTO myself and gave some alternatives there. I've done 3 Vettes but never took pics That was a mistake I'll soon rectify. The Vette notes are pretty much mine with some good ideas from Joe_G over here. I've got great customers who are very knowledgeable and I appreciate their notes and comments! I'm just happy I could host consolidate and host it