She'll be coming. 
I think Cams are great, especially with Heads! 
Chose my cam!!
Thread Starter
Burning Brakes
Joined: Feb 2006
Posts: 903
Likes: 5
From: Miami FL
Chose my cam!!
Well after much thought I've decided to go with a cam. It will work with either my future maggie/ECS/A&A system in the future. The car will hopefully make somewhere in the 420-430's with the cam only.
The specs are 228*-234*-114*-.630"-.600"
I had my good friend at FTI grind the cam for me. He's done several in the past and I haven't been dissapointed yet.
The cam goes in this week courtesy of the guys over at Horsepower Sales. They should have it wrapped up later this week. I'll keep you guys updated.
Dougie
The specs are 228*-234*-114*-.630"-.600"
I had my good friend at FTI grind the cam for me. He's done several in the past and I haven't been dissapointed yet.
The cam goes in this week courtesy of the guys over at Horsepower Sales. They should have it wrapped up later this week. I'll keep you guys updated.
Dougie
Tech Contributor
Joined: Jul 2002
Posts: 14,950
Likes: 264
From: St. Louis, MO
St. Jude Donor '08
Awesome!
Here's the skinny:
http://www.corvettechallengemmp.com/home.php
Gates open at 430, we usually have our first time trial by 6 or so. Moroso gives us the skidpad down by the left lane finish line to set up and our own tech inspector which is great.
We've got a great bunch of guys. A lot of good friendships have been forged at the Challenge, I think you'll like it. See you there!
Here's the skinny:
http://www.corvettechallengemmp.com/home.php
Gates open at 430, we usually have our first time trial by 6 or so. Moroso gives us the skidpad down by the left lane finish line to set up and our own tech inspector which is great.
We've got a great bunch of guys. A lot of good friendships have been forged at the Challenge, I think you'll like it. See you there!
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Pro
Joined: Feb 2004
Posts: 644
Likes: 0
From: fort lauderdale fl
I was thinking of having horsepower sales do a cam install as well,Im interested to see the results.Pm me what they are charging for the cam install.I will come up to the challenge sat,but I just had my headers,off r x,and 410 gears installed so I might not have enough breakin miles to risk some passes.My car is getting tuned at breathless tue or wed.What time do you guys usually get up there?
Tech Contributor
Joined: Jul 2002
Posts: 14,950
Likes: 264
From: St. Louis, MO
St. Jude Donor '08
Originally Posted by billywallstreet73
I was thinking of having horsepower sales do a cam install as well,Im interested to see the results.Pm me what they are charging for the cam install.I will come up to the challenge sat,but I just had my headers,off r x,and 410 gears installed so I might not have enough breakin miles to risk some passes.My car is getting tuned at breathless tue or wed.What time do you guys usually get up there?