wheels offset
Thread Starter
Racer
Joined: Nov 2006
Posts: 258
Likes: 0
From: allentown pa
wheels offset
can someone tell me the offsets on c6 and c6z im doing widebody on rear but not front have stock c6z wheels will the fronts fit and if so how much will they stickout and can i make them not stick out.
Race Director
Joined: Mar 2005
Posts: 11,549
Likes: 27
From: Southampton NJ
Last edited by dennis50nj; Jan 6, 2007 at 10:10 AM.
Safety Car
Joined: Aug 2004
Posts: 4,067
Likes: 62
From: Houston Texas
Here is how you figure it, there is 25.5 mm in an inch. The Z06 wheel is a full inch wider, but it is a half inch on the inside and half inch on the outside. So take 13mm for numbers sake for the outside, now take in the 16 mm offset difference from 56 to 40, that gives you a total of 29mm just over an inch. If you plan to go with an aftermarket wheel I plan to go with a 10" at 40-42mm because at 9.5" at 40mm it tucks in about a 1/4 inch to far IMHO so the 10" will put it flush with the fender. As far as the rear 59 is about flush with the rear, I plan to go with a 20x12.5 with about a 64mm offset. That will keep it in line with the stock rear setting. Perreli makes a 345x25x20 that looks incredible on a 12.5. Good luck 
Last edited by vertC6; Jan 6, 2007 at 02:17 PM.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
