Crankshaft Ls1 4" for LS2
Thread Starter
Racer
Joined: Dec 2005
Posts: 361
Likes: 0
From: Russia, Moscow
Crankshaft Ls1 4" for LS2
Hi
Beside me question: possible use the crankshaft LS1 4" for Ls2 C6 05?
After all there another reluctor wheel. Will it is correct to work crank sensor?
There is experience who answer.
Beside me question: possible use the crankshaft LS1 4" for Ls2 C6 05?
After all there another reluctor wheel. Will it is correct to work crank sensor?
There is experience who answer.
Heel & Toe
Joined: Mar 2006
Posts: 16
Likes: 0
From: Lutz (Tampa) FL
Good Luck.
Heel & Toe
Joined: Mar 2006
Posts: 16
Likes: 0
From: Lutz (Tampa) FL
That is correct, if you have the white/grey sensor than you have a 58x reluctor wheel. This change happened in the 06 model year. Technically speaking the crank will still work you will need the old reluctor wheel removed and the new style (58x0 pressed on. If you are buying a new crank, most aftermarket vendors will give you the option of reluctor wheel style when you purchase the crank.
