partner recked his 1998 c5 in ditch ,I found a2006 front & rear bumper free ya. but can I convert it over ? I need new fenders ,but hood is fine please tell me .

 

No.

 

Not unless you are trying to build an abomination.

 

Now what would that look like?

 

According to the late Johnny Cash, I think you can make it work out. Remember these lyrics:

Now, up to now my plan went all right
'Til we tried to put it all together one night
And that's when we noticed that something was definitely wrong.

The transmission was a '53
And the motor turned out to be a '73
And when we tried to put in the bolts all the holes were gone.

So we drilled it out so that it would fit
And with a little bit of help with an A-daptor kit
We had that engine runnin' just like a song
Now the headlight' was another sight
We had two on the left and one on the right
But when we pulled out the switch all three of 'em come on.

The back end looked kinda funny too
But we put it together and when we got thru
Well, that's when we noticed that we only had one tail-fin
About that time my wife walked out
And I could see in her eyes that she had her doubts
But she opened the door and said "Honey, take me for a spin."

So we drove up town just to get the tags
And I headed her right on down main drag
I could hear everybody laughin' for blocks around
But up there at the court house they didn't laugh
'Cause to type it up it took the whole staff
And when they got through the title weighed sixty pounds.

I got it one piece at a time
And it didn't cost me a dime
You'll know it's me when I come through your town
I'm gonna ride around in style
I'm gonna drive everybody wild
'Cause I'll have the only one there is around.

You might say I went right up to the factory
And picked it up, it's cheaper that way
Ugh!, what model is it?

Well, It's a '49, '50, '51, '52, '53, '54, '55, '56
'57, '58' 59' automobile
It's a '60, '61, '62, '63, '64, '65, '66, '67
'68, '69, '70 automobile.

 

NO, but anything can be done.

 

Nope
2 different anamals

 

Lets see the C6 wheelbase is longer and length is shorter than a C5.

All you need is a big chop gun and 40 gallons of bondo.

 

might as well make you own custom parts with all the work that would take.....wont even talk about it looking like hell!!!