Clearing codes?
Thread Starter
Pro
Joined: Jun 2006
Posts: 667
Likes: 0
From: Marysville WA
Clearing codes?
I have some codes I want to clear. I have a code reader that will erase the codes but it says that the ignition must be on and the engine NOT running. Well how do we do that with the pushbutton start? I know how to get to acc mode, but that is definitely not the same thing as ignition on but engine not started. Thanks for the help!
Le Mans Master
Joined: Dec 2002
Posts: 7,588
Likes: 6
From: Montreal Qc
I have some codes I want to clear. I have a code reader that will erase the codes but it says that the ignition must be on and the engine NOT running. Well how do we do that with the pushbutton start? I know how to get to acc mode, but that is definitely not the same thing as ignition on but engine not started. Thanks for the help!
Moderator emeritus
Joined: Jun 2001
Posts: 18,599
Likes: 3,951
From: Jacksonville Florida BWO Dayton, Cincinnati, Bloomsbury NJ, Cincinnati
2015 C7 of the Year Finalist
The DIC will tell you that the ignition is "ON"
Safety Car
Joined: Jun 2004
Posts: 3,563
Likes: 2
From: Dallas Tx
The other thing to consider is you really don't need to do anything. Once the problem that caused the code is corrected. After so many drive cycles the codes will erase themselves. Once the problem is corrected, it's normally a handfull of drive cycles without the problem present (maybe 3 or so) that turns off the CEL light. Then another number of drive cycles (maybe 40, it varies) will then automatically erase the codes.
