Rear Compartment Lid Release Switch
Thread Starter
Instructor
Joined: Mar 2005
Posts: 120
Likes: 0
Rear Compartment Lid Release Switch
I've the problem with the non working trunk release button. I read the FAQ from Pipedreams about these topic. I checked the harness and found out that the switch was stuck in. Now I want to remove that thing to clean it up. But I don't know how to remove the switch. Pipedreams says there are two clips to press and the switch drops down. But where are these clips?
Le Mans Master
Joined: Dec 2002
Posts: 7,588
Likes: 6
From: Montreal Qc
I've the problem with the non working trunk release button. I read the FAQ from Pipedreams about these topic. I checked the harness and found out that the switch was stuck in. Now I want to remove that thing to clean it up. But I don't know how to remove the switch. Pipedreams says there are two clips to press and the switch drops down. But where are these clips?
Thread Starter
Instructor
Joined: Mar 2005
Posts: 120
Likes: 0
You may also be able to access the switch by going in on the top of the license plate opening.
I removed the taillight and unplugged the harness but I couldn't find any clip to drop down the whole (unplugged) switch.
Racer
Joined: Jun 2005
Posts: 307
Likes: 1
From: Mine Hill New Jersey
If memory serves when I fixed mine, once you remove the wiring connector, simply feel around the housing and squeeze two expanding tabs to release the switch from the bumper cover. I don't remember any clips holding it in.
