I was wondering if anyone has done a custom spintech catback on a 05+ c6? I was wondering which pro street or super pro street series will fit for a custom catback? thanks

Kenneth

 

Who?

 

I was wondering the same thing, so I went to google:

Here's their page:

"Designed and developed for serious competition

Race Proven Performance

In the early 1980's, mufflers on race cars were rare, but as the population encroached on local race venues, sound levels started being monitored. As sound level regulations became more stringent it was apparent performance was being compromised and the search for performance race mufflers began.

In late 1995, Spin Tech began to develop a high flow racing muffler for competition.

After over a year of testing under real race conditions as well as engine room dyno-testing, Spin Tech was ready to go heads up against other performance mufflers.

Our first full year of competition brought Spin Tech performance mufflers championships in two of the toughest open wheel racing organizations, The World of Out Laws and The Sprint Car Racing Association.

Spin Tech is now the dominant muffler in open wheel competition. It's not uncommon to find 80% of the field using Spin Tech mufflers. Some of the most prominent people in open wheel racing report that Spin Tech mufflers are the "best muffler they've ever tested." From Portland to Tucson and Eastward, Spin Tech is there every lap!

In late 1998, Spin Tech embarked on a new advanced technology for the drag racing industry that would ultimately spill over the high performance street market.

For the hot rod enthusiast, Spin Tech developed affordable oval exhaust system components that had previously only been used in big league stock car racing. From 2" to 5" oval systems, they are already finding their way down the 1/4 mile approaching the 200-mph mark."

 

It is funny, because just today I was researching different mufflers for the C6 that no one has used. I have heard Spintechs on Mustangs, but never a Vette. I would like to hear them.

-Andy

 

Well GTO guys with ls2 have them and sound amazing. I had a 02 mustang gt and love the sound, better than any other muffler and very different, I just dont know what how big of a muffler I can go with to make it fit?

 

We are a Spintech dealer, and they are very popular in the GTO/Mustang/F-body community. I know they were working on a C6 system. I will call them later this week and see the status.
------------------------------------------------------
www.MarylandSpeed.com- Unmatched Service & Great Prices!

We Have a Sale on Kooks Headers Going!
Current Poject- 2007 Loaded Machine Metallic LT3, A6 Targa (Not Stock)

 

I sent u a pm but no response? when are they going to have the catback for the c6? Also how much for each muffler and a xpipe from you? Thanks

Kenneth

 

I had a custom setup made for my 08 Vette using FlowPro Twisters which are very similar to the spintechs. They sounded great and the sound at wide open throttle was like fine music. The only problem I had was a booming sound inside the car at low rpms. My car is an A6 and stays at low rpms when driving normal. One moving and in third gear the booming went away. There was no resonance at highway speeds. I think that in a M6 car with lower gearing they would be perfect. After about 300 miles I took them off and put my boring, er I mean Borla, Touring cat back on. If any body wants my FlowPro Twister system I will sell it for $250.

 

Talked to Spintech. They need a car to do a prototype on. If anyone in southern California is interested, call them at 1 888 550 SPIN, and talk to Ron. I think you get free install and a discount off the system.