A6 Transmission Improvement
Advanced
Joined: Oct 2007
Posts: 93
Likes: 2
From: Las Vegas
Le Mans Master
Joined: Aug 2001
Posts: 8,145
Likes: 1
From: Bradenton FLORIDA
Former Vendor
Joined: Nov 2005
Posts: 11,792
Likes: 255
From: Ossining New York
St. Jude Donor '07-'08-'09-'10-'12-'13-'14
Here's an Idea!
In just a few days the "CoW A6 ATTACK & CoW A6 TOTAL ATTACK Packages will be made public!
It should not be tough to get 10 or more guys together for me to come back there.....
Vegas has got tons of Vettes!
Chuck CoW
Le Mans Master
Joined: Aug 2001
Posts: 8,145
Likes: 1
From: Bradenton FLORIDA
Here's an idea... Get me to come back to VEGAS for the 3rd time this year.....
In just a few days the "CoW A6 ATTACK & CoW A6 TOTAL ATTACK Packages will be made public!
It should not be tough to get 10 or more guys together for me to come back there.....
Vegas has got tons of Vettes!
Chuck CoW
In just a few days the "CoW A6 ATTACK & CoW A6 TOTAL ATTACK Packages will be made public!
It should not be tough to get 10 or more guys together for me to come back there.....
Vegas has got tons of Vettes!
Chuck CoW
Former Vendor
Joined: Nov 2005
Posts: 11,792
Likes: 255
From: Ossining New York
St. Jude Donor '07-'08-'09-'10-'12-'13-'14
Complete A6 Tuning
Right now, I have THE MOST COMPLETE A6 TUNE IN THE BUSINESS.
I have software nobody else has yet....and I've messed with everything that can be messed with!
YES, PADDLES TOO!
For the other guy.... The A6 ATTACK PACKAGES are based on MY TUNE and the new...
CoW 3.15 and as of yesterday 3.42 REAR DIFF for the A6!!!
Kiss those sticks GOODBYE!
Chuck CoW
I have software nobody else has yet....and I've messed with everything that can be messed with!
YES, PADDLES TOO!
For the other guy.... The A6 ATTACK PACKAGES are based on MY TUNE and the new...
CoW 3.15 and as of yesterday 3.42 REAR DIFF for the A6!!!
Kiss those sticks GOODBYE!
Chuck CoW
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Former Vendor
Joined: Nov 2005
Posts: 11,792
Likes: 255
From: Ossining New York
St. Jude Donor '07-'08-'09-'10-'12-'13-'14
Not yet........
Until then.....YES, AS ALWAYS MY RE-TUNES ARE ALWAYS FREE FOR EXISTING CUSTOMERS!
But, no need to wait till spring... I see the CoW A6 ATTACK PACKAGE in your very near future!
Chuck CoW
Drifting
Joined: Jul 2003
Posts: 1,796
Likes: 1
From: Annandale VA
Not yet....Right now I actually have one of the few AUTOCAL beta test units...Testing is going well and we expect a finished product in the next few months.....
Until then.....YES, AS ALWAYS MY RE-TUNES ARE ALWAYS FREE FOR EXISTING CUSTOMERS!
But, no need to wait till spring... I see the CoW A6 ATTACK PACKAGE in your very near future!
Chuck CoW
Until then.....YES, AS ALWAYS MY RE-TUNES ARE ALWAYS FREE FOR EXISTING CUSTOMERS!
But, no need to wait till spring... I see the CoW A6 ATTACK PACKAGE in your very near future!
Chuck CoW
If I remember correctly, you had one of the AUTOCAL beta units over a year ago, as did at least one other person that I know of locally. So this must be a Beta2 version, or perhaps a "Charlie" version.
Been waiting for the AUTOCAL for over a year now, hope it isn't just another mirage on the horizon.
Advanced
Joined: Oct 2007
Posts: 93
Likes: 2
From: Las Vegas
Here's an idea... Get me to come back to VEGAS for the 3rd time this year.....
In just a few days the "CoW A6 ATTACK & CoW A6 TOTAL ATTACK Packages will be made public!
It should not be tough to get 10 or more guys together for me to come back there.....
Vegas has got tons of Vettes!
Chuck CoW
In just a few days the "CoW A6 ATTACK & CoW A6 TOTAL ATTACK Packages will be made public!
It should not be tough to get 10 or more guys together for me to come back there.....
Vegas has got tons of Vettes!
Chuck CoW
Just let me know when and where and I'll be there ...
Former Vendor
Joined: Nov 2005
Posts: 11,792
Likes: 255
From: Ossining New York
St. Jude Donor '07-'08-'09-'10-'12-'13-'14
Not exactly....
Chuck, you are truly a visionary!
If I remember correctly, you had one of the AUTOCAL beta units over a year ago, as did at least one other person that I know of locally. So this must be a Beta2 version, or perhaps a "Charlie" version.
Been waiting for the AUTOCAL for over a year now, hope it isn't just another mirage on the horizon.
If I remember correctly, you had one of the AUTOCAL beta units over a year ago, as did at least one other person that I know of locally. So this must be a Beta2 version, or perhaps a "Charlie" version.
Been waiting for the AUTOCAL for over a year now, hope it isn't just another mirage on the horizon.
I DO NOW POSSES an actual AUTOCAL device and I'm presently BETA TESTING the unit for EFI LIVE...
All is going good!
Chuck COW
Former Vendor
Joined: Nov 2005
Posts: 11,792
Likes: 255
From: Ossining New York
St. Jude Donor '07-'08-'09-'10-'12-'13-'14
Sooner than you think!
It's all up to YOU. Not me....
I might be back there sooner than you think....
If you can get enough guys together, I can be there in two days...Know what I'm saying???
Start a thread about me returning to VEGAS maybe some time in JANUARY OR just after....and let's see what develops...
I don't just decide to go places....YOU GUYS have to drum up the demand.
REMEMBER! I'll likely be in TEXAS MID JANUARY....VEGAS is less than an HOUR flight and I'd be more than happy to come back!
Chuck CoW
Melting Slicks
Joined: Jun 2004
Posts: 2,130
Likes: 54
From: Granbury, Pecan Plantation TX
It's all up to YOU. Not me....
I might be back there sooner than you think....
If you can get enough guys together, I can be there in two days...Know what I'm saying???
Start a thread about me returning to VEGAS maybe some time in JANUARY OR just after....and let's see what develops...
I don't just decide to go places....YOU GUYS have to drum up the demand.
REMEMBER! I'll likely be in TEXAS MID JANUARY....VEGAS is less than an HOUR flight and I'd be more than happy to come back!
Chuck CoW
I might be back there sooner than you think....
If you can get enough guys together, I can be there in two days...Know what I'm saying???
Start a thread about me returning to VEGAS maybe some time in JANUARY OR just after....and let's see what develops...
I don't just decide to go places....YOU GUYS have to drum up the demand.
REMEMBER! I'll likely be in TEXAS MID JANUARY....VEGAS is less than an HOUR flight and I'd be more than happy to come back!
Chuck CoW
Intermediate
Joined: Oct 2007
Posts: 36
Likes: 0
From: miami fla.
hey t---------i have the '08 a6 and am very interested in this mod. i two feel the tranny shifting weak and sloppy and would love very positive and quick shifts at optimum rpm's (both up and down). a few questions: what do you exactly modify and what parameters do you use? would this mod improve thhe paddleshifters as well? i will probably install a ram air intake, would doing this affect this mod? and finally how would you get this software to me? sorry for all the questions- as i'm new to this game and i cant think of anyone better to ask than you guys on this forum . i'll appreciate any info you can share
Le Mans Master
Joined: Aug 2001
Posts: 8,145
Likes: 1
From: Bradenton FLORIDA
hey t---------i have the '08 a6 and am very interested in this mod. i two feel the tranny shifting weak and sloppy and would love very positive and quick shifts at optimum rpm's (both up and down). a few questions: what do you exactly modify and what parameters do you use? would this mod improve thhe paddleshifters as well? i will probably install a ram air intake, would doing this affect this mod? and finally how would you get this software to me? sorry for all the questions- as i'm new to this game and i cant think of anyone better to ask than you guys on this forum . i'll appreciate any info you can share
