RPM Hanging problem
Thread Starter
Instructor
Joined: Dec 2003
Posts: 129
Likes: 0
From: Tyler Tx
RPM Hanging problem
Having a little problem with the RPM hanging when shifting from 1st to 2nd I thought it was because of the cold weather so took it back to my tuner, well the car ran fine over there 100 miles and they looked at it! car ran ok half way home and started doing it again, 75degrees out, also when car goes to idle the idle jumps up to 1300rpm one time then its fine, any ideas what to look for?? I have checked for vacuum leaks and did not find any, I just had the slave cylinder replaced just before this started.
Thanks for any help!
Thanks for any help!
