Invisicord???
Thread Starter
Drifting
Joined: Apr 2007
Posts: 1,619
Likes: 4
From: Houston TX
Invisicord???
Ok I took the plunge. Ordered the invisicord. I was wondering if someone would be kind enough to let me know which socket I stab on the back of my rearview mirror to get this thing to work... without frying the electrical system in my car....
Any help would be greatly appreciated...
Any help would be greatly appreciated...
PHOTOSHOP SPECIALIST
Joined: Aug 2007
Posts: 16,433
Likes: 40
St. Jude Donor '07-'08-'09-'10-'11-'12-'13-'14-'15-'16
The following is courtesy of Bugman's Website:
http://www.bugmanweb.com/c6/radar.html
(Note: Refer to picture below to assure proper installation of current Invisicord.)
http://www.bugmanweb.com/c6/radar.html
(Note: Refer to picture below to assure proper installation of current Invisicord.)
Thread Starter
Drifting
Joined: Apr 2007
Posts: 1,619
Likes: 4
From: Houston TX
Alright got it today and was WAAAAY to anxious to wait. Invisicord to the RESCUE!!! OMG my ashtry is closed. I got the 12" one and boy is it NICE.... even though my radar detector is about 4 inches below on the wiindshield the 12" cord barely cut it which is nice cuz there's no slack in my cord. I LUV INVISCORD!!! Thanks guys!!!
Safety Car
Joined: Jun 1999
Posts: 3,570
Likes: 3
From: Austin, Singapore, Kuala Lumpur, Houston, Dallas, Hong Kong, Elgin, etc.. Texas
Great write up and photos.
One thing was overlooked. There is nothing to prevent the Inviscord pins from being accidentally pulled out while connecting/disconnecting the radar detector. After mine had fallen/pulled out for the third time, I tie wrapped the Inviscord wire to the OEM wiring harness as a strain relief. This step is also in the factory instructions.
One thing was overlooked. There is nothing to prevent the Inviscord pins from being accidentally pulled out while connecting/disconnecting the radar detector. After mine had fallen/pulled out for the third time, I tie wrapped the Inviscord wire to the OEM wiring harness as a strain relief. This step is also in the factory instructions.
PHOTOSHOP SPECIALIST
Joined: Aug 2007
Posts: 16,433
Likes: 40
St. Jude Donor '07-'08-'09-'10-'11-'12-'13-'14-'15-'16
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
5 Best & 5 Worst Corvette Daily Drivers
Joe Kucinski
The Headlights of Every Corvette Generation Explained
Joe Kucinski
5 Best & 5 Most Overrated Corvette Track Packages of All Time!
Joe Kucinski
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
Thread Starter
Drifting
Joined: Apr 2007
Posts: 1,619
Likes: 4
From: Houston TX
sorry I did that same I took a loop around the existing harness to prevent "pullage" new word like it?
hehe
and i also took a black sharpie to the yellow wire covers... nice and clean
hehe
and i also took a black sharpie to the yellow wire covers... nice and clean
