Blower info request
Thread Starter
Intermediate
Joined: Sep 2008
Posts: 34
Likes: 0
Blower info request
I am hoping to research blower performance, noise and cost for my 07 C6. I posted an earlier thread and heard good results on several. Iwould like to keep my stock hood and blower noise as low as possible.
Drifting
Joined: Jul 2005
Posts: 1,969
Likes: 8
From: NJ
Post in the FI section!
1st buy a kit from a good vendor. A@A or ECS would be my top choices. They include extras and lil tweeks that make the install and final product that much better.
Blower noise to me is like a sweet siren so its hard for me to comment on a quiet blower. However, I'm a big fan of Paxton and Vortech. I've run every one of the centrifugal blower excluding a few of the real off brands and those 2 are tops IMO.
I'm running a pretty big JT right now and its not qiuet
1st buy a kit from a good vendor. A@A or ECS would be my top choices. They include extras and lil tweeks that make the install and final product that much better.
Blower noise to me is like a sweet siren so its hard for me to comment on a quiet blower. However, I'm a big fan of Paxton and Vortech. I've run every one of the centrifugal blower excluding a few of the real off brands and those 2 are tops IMO.
I'm running a pretty big JT right now and its not qiuet
Former Vendor
Joined: Apr 1999
Posts: 7,607
Likes: 1
From: ECS Sales & Service Advisor
Cruise-In III Veteran
Cruise-In V Veteran
The quitest, the most powerful and proven system for the Corvette is the Paxton. You can see our see our C6 system here.... http://www.eastcoastsupercharging.com/SC600.html
It's not the cheapest system on the market, and it shouldn't be - as it is the most complete. You can spend less, and go slower, as well as add more parts later on, but the ECS kit works. Everytime.
Give us a call, or shoot me an email if you have any questions. 609-752-0321, mike@eastcoastsupercharging.com.
It's not the cheapest system on the market, and it shouldn't be - as it is the most complete. You can spend less, and go slower, as well as add more parts later on, but the ECS kit works. Everytime.
Give us a call, or shoot me an email if you have any questions. 609-752-0321, mike@eastcoastsupercharging.com.
Racer
Joined: Apr 2007
Posts: 393
Likes: 0
From: Austin Texas
They just released a "Ram-Air" Intercooler. They are the only ones with this feature to keep IAT (Intake Air Temp) low, with a huge distance between the intercooler and the radiator to increase airflow through the radiator.
Take a look here to see what it looks like.
http://forums.corvetteforum.com/show...977&highlight=
Last edited by Rainmaker; Oct 3, 2008 at 06:28 PM.
Advanced
Joined: May 2003
Posts: 54
Likes: 0
From: Largo Florida
You want power and reliability and better fuel mileage go with A&A Supercharging. Andy has the best under the hood system going. I have worked with a lot of them from him. They are simply the best under the hood systems. With a good tuner you will get 1 to 2 miles better fuel mileage on highway.
Chris
Chris
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Thread Starter
Intermediate
Joined: Sep 2008
Posts: 34
Likes: 0
I think the ZR1 is equipped with a Weiand 142 root style blower. I'm not sure though. Does anyone else know? surely whatever it is would be reliable and high quality if GM would put it on their most expensive Vette ever.
Burning Brakes
Joined: Aug 2005
Posts: 1,025
Likes: 0
From: LA CA
The A&A Vortec is the best engineered system on the market. If you want a quiet SC, go with the A&A Vortec SQ (Super Quiet) series.
They just released a "Ram-Air" Intercooler. They are the only ones with this feature to keep IAT (Intake Air Temp) low, with a huge distance between the intercooler and the radiator to increase airflow through the radiator.
Take a look here to see what it looks like.
http://forums.corvetteforum.com/show...977&highlight=
They just released a "Ram-Air" Intercooler. They are the only ones with this feature to keep IAT (Intake Air Temp) low, with a huge distance between the intercooler and the radiator to increase airflow through the radiator.
Take a look here to see what it looks like.
http://forums.corvetteforum.com/show...977&highlight=
Another happy customer checking in. 
Le Mans Master
Joined: Oct 2007
Posts: 6,149
Likes: 11
From: Greater Detroit Metro MI, when I'm not travelling.
Noise wise the quietest blower you can get for a C6 is the Vortech V2 S-Trim SQ. SQ = Super Quiet.
Paxtons aren't too loud either from what I've heard, but are certainly louder than Vortech SQ.
My recommendatin would be A&A's kit... Mine made 600WHP / 518RWTQ on a conservative pump gas tune and they are still on sale fr $5300 shipped
Mine came with everything I needed to install; down to the plugs, injectors, every clamp, everything, and did the install myself
Last edited by PowerLabs; Oct 4, 2008 at 10:49 PM.
Le Mans Master
Joined: Oct 2007
Posts: 6,149
Likes: 11
From: Greater Detroit Metro MI, when I'm not travelling.
No, the ZR1 is equipped with an Eaton corporation Roots TVS 2300 blower, and, as you may have noticed, that does require a modified hood for clearance (the OP asked about a blower that will fit under the stock hood). It is also not particularly quiet; the ZR1 exibits some blower noise and has some intake silencing as well.
Safety Car
Joined: Oct 2001
Posts: 4,945
Likes: 0
From: Dallas/Valley Ranch TEXAS!!!
as stated earlier, A&A has just made some new changes to their kit, it's now my favorite kit on the market... And this is from a "procharger" guy... The "Ram" Air flipped FMIC, the new tensioner bracket, and all of the tried and true parts, the price is just a bonus... this kit would be superior to all others and still a better value if it were more money than all the others... but it's not more $$$, it's less... That CRAZY!!! A&A FTW!!!
And as stated earlier check the C6 F.I. N2O section for more detailed info... see link below
http://forums.corvetteforum.com/foru...ysprune=&f=123
And as stated earlier check the C6 F.I. N2O section for more detailed info...
see link belowhttp://forums.corvetteforum.com/foru...ysprune=&f=123
Le Mans Master
Joined: Oct 2007
Posts: 6,149
Likes: 11
From: Greater Detroit Metro MI, when I'm not travelling.
as stated earlier, A&A has just made some new changes to their kit, it's now my favorite kit on the market... And this is from a "procharger" guy... The "Ram" Air flipped FMIC, the new tensioner bracket, and all of the tried and true parts, the price is just a bonus... this kit would be superior to all others and still a better value if it were more money than all the others... but it's not more $$$, it's less... That CRAZY!!! A&A FTW!!!
And as stated earlier check the C6 F.I. N2O section for more detailed info... see link below
http://forums.corvetteforum.com/foru...ysprune=&f=123
And as stated earlier check the C6 F.I. N2O section for more detailed info...
see link belowhttp://forums.corvetteforum.com/foru...ysprune=&f=123
I'm very glad I went with A&A!
Instructor
Joined: Mar 2007
Posts: 221
Likes: 0
From: Las Vegas Nevada
Or you can also , contact Pete at Callaway, he can do a turn key install and give you a very reliable, fun car to drive as well . I had mine done with him and have never looked back . .. many great tuners out there . It all depends on what you want . Just remember when it's all said an done WE only have our memories enjoy !
Last edited by alcgomez; Oct 10, 2008 at 01:24 AM.
Melting Slicks
Joined: Jan 2007
Posts: 2,127
Likes: 7
From: Nj/Pa
where u located for starters. im sure u could hear them in person. someone should be near u to hear them. thats the same thing i did and went with paxton. very quiet and makes awesome power at the same time.
