jacking pucks

Reply Subscribe

Thread Tools

Search this Thread

Nov 4, 2008 | 02:40 AM

alangordon

Thread Starter

Advanced

Joined: May 2007

Posts: 88

Likes: 12

jacking pucks

Can someone tell me who carries jacking pucks for the c6,and who has the best deal. thanks in advance.

Nov 4, 2008 | 08:46 AM

AintQik

Drifting

Joined: Jul 2005

Posts: 1,969

Likes: 8

From: NJ

The best deal is to go to your local Dick's Sporting goods and get some hockey pucks. Work pretty good for me.

Katech has some pretty slick aluminum (i think) pucks and they are forum vendors. Give Jason a call.

Nov 4, 2008 | 11:13 AM

CMY SIX

Safety Car

Joined: Feb 2007

Posts: 4,684

Likes: 107

From: Opelika Alabama

I think I got mine from elite eng. they come in red or blue aluminum and they make them thicker than most to accomadate the depth of the cup on different jacks, use blue "painters tape on the car where the puck is that way you won't forget them like I/we did!

Nov 4, 2008 | 11:36 AM

jimmie jam

Le Mans Master

Joined: May 2005

Posts: 6,659

Likes: 828

From: FORT LAUDERDALE FL

I have BMW pucks that are available at BMW or one of the aftermarket catalog suppliers. sorry, don't remember the pn.

Nov 4, 2008 | 11:39 AM

zare191

Burning Brakes

Joined: Jun 2006

Posts: 913

Likes: 36

From: Scottsdale Arizona

Quote:

Originally Posted by jimmie jam

I have BMW pucks that are available at BMW or one of the aftermarket catalog suppliers. sorry, don't remember the pn.

pn 51 71 8 268 885

Nov 4, 2008 | 11:41 AM

knick

Pro

Joined: May 2008

Posts: 520

Likes: 1

From: middle tn

fleabay...nine bucks

Nov 4, 2008 | 11:46 AM

*FAÇADE*

PHOTOSHOP SPECIALIST

Joined: Aug 2007

Posts: 16,433

Likes: 40

St. Jude Donor '07-'08-'09-'10-'11-'12-'13-'14-'15-'16

Quote:

Originally Posted by jimmie jam

I have BMW pucks that are available at BMW or one of the aftermarket catalog suppliers. sorry, don't remember the pn.

BMW Round Pads:
(Diameter = 2.75" Height = 0.5")

Order here . . .

http://www.bavauto.com/fland.asp?par...1+71+1+960+752

Part # 51 71 1 960 752
(For a 1998 BMW 318i)

Nov 4, 2008 | 12:22 PM

jimmie jam

Le Mans Master

Joined: May 2005

Posts: 6,659

Likes: 828

From: FORT LAUDERDALE FL

Quote:

Originally Posted by FAÇADE-C6

BMW Round Pads:
(Diameter = 2.75" Height = 0.5")

Order here . . .

http://www.bavauto.com/fland.asp?par...1+71+1+960+752

Part # 51 71 1 960 752
(For a 1998 BMW 318i)

that's it! (mine are in 24/7)

Corvette Stories

The Best of Corvette for Corvette Enthusiasts

10 Ugly Corvettes That We Still Kinda Love

Joe Kucinski

Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer

Brett Foote

10 Things Every Corvette Owner Needs (2026 Edition)

Michael S. Palmer

8 Most "Only Corvette Owners Understand" Quirks and Problems

Pouria Savadkouei

10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years

Joe Kucinski

How Much Horsepower Every Corvette Engine "LOST" in 1972

Joe Kucinski

Top 10 DOs and DON'Ts for Protecting Your Convertible Top!

Michael S. Palmer

Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!

Joe Kucinski

150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter

Joe Kucinski

8 Coolest Corvette Pace Cars (and Replicas) of All Time

Verdad Gallardo

Nov 4, 2008 | 12:43 PM

AmmoVet

Melting Slicks

Joined: Dec 2004

Posts: 3,248

Likes: 564

From: Margaritaville Daytona

Agree BMW & 24/7.

Nov 4, 2008 | 12:47 PM

#10

tmak26b

Burning Brakes

Joined: Sep 2007

Posts: 1,040

Likes: 0

You can probably find two on I-84, I dropped two of them already as I forgot to take it off duh

Nov 4, 2008 | 05:31 PM

#11

nearwater

Racer

Joined: Aug 2008

Posts: 402

Likes: 0

From: Sterling Heights MI

Are those BMW pucks sold in pairs?
it says $12.95, but doesn't state how many.

Dan

Nov 4, 2008 | 05:48 PM

#12

jimmie jam

Le Mans Master

Joined: May 2005

Posts: 6,659

Likes: 828

From: FORT LAUDERDALE FL

dan, i believe that they are sold in pairs. i just can't remember, i bought them when i had my 04.

Nov 4, 2008 | 08:24 PM

#13

ZPO

Pro

Joined: Jan 2008

Posts: 674

Likes: 1

From: Auburn, AL

Make you own set!!

Make your own from real hockey pucks and some eyebolts. I ended up making 2 sets and I keep 1 set in the car in the rear storage bin for emergency use. Check these earlier posts:

http://forums.corvetteforum.com/show...41&postcount=4

http://forums.corvetteforum.com/show...73&postcount=9

Nov 4, 2008 | 08:47 PM

#14

DSOMvette

Pro

Joined: Oct 2008

Posts: 735

Likes: 3

From: New Harmony IN

St. Jude Donor '09

Quote:

Originally Posted by ZPO

made mine from the hockey pucks for about $12.00 including eye bolts from lowes.

Nov 4, 2008 | 09:12 PM

#15

cmonkey713

Race Director

Joined: Aug 2008

Posts: 14,098

Likes: 1,605

From: Edmond Oklahoma

Quote:

Originally Posted by AintQik

Hocky Pucks with #4 eye screw in the middle to hold them in place. Total cost about $6.00. Or you can always spend $80.00 or so on some really nice aluminum pucks.

Feb 3, 2009 | 02:14 PM

#16

haljensen

Race Director

Joined: Mar 2005

Posts: 10,399

Likes: 26

From: Austin Texas

Jacking pucks

Quote:

Originally Posted by nearwater

Are those BMW pucks sold in pairs?
it says $12.95, but doesn't state how many.

Dan

Old thread but I found it on a search for jacking pucks. The BMW pucks at my local dealer are $18.72 (round) or $20.65 (square) EACH!

Feb 3, 2009 | 02:42 PM

#17

Pylons

Burning Brakes

Joined: Aug 2008

Posts: 1,220

Likes: 3

I bought a set of 4 hockey pucks with eye bolts in them from eBay...working great so far...

Feb 3, 2009 | 03:00 PM

#18

AgDriller

Advanced

Joined: Dec 2007

Posts: 81

Likes: 2

From: Cypress Texas

Quote:

Originally Posted by cmonkey713

Hocky Pucks with #4 eye screw in the middle to hold them in place. Total cost about $6.00. Or you can always spend $80.00 or so on some really nice aluminum pucks.

too. It's a no brainer. It takes 5 minutes to make them and they work perfect. You put the eye in the slot and turn and the stay put while jacking.

Spend the $$ on something actually shows.

Feb 3, 2009 | 08:23 PM

#19

Red Rochester

Le Mans Master

Joined: Feb 2008

Posts: 8,515

Likes: 255

From: Rochester New York

Quote:

Originally Posted by AgDriller

too. It's a no brainer. It takes 5 minutes to make them and they work perfect. You put the eye in the slot and turn and the stay put while jacking.

Spend the $$ on something actually shows.

The way to go

Feb 3, 2009 | 11:45 PM

#20

haljensen

Race Director

Joined: Mar 2005

Posts: 10,399

Likes: 26

From: Austin Texas

Quote:

Originally Posted by AgDriller

too. It's a no brainer. It takes 5 minutes to make them and they work perfect. You put the eye in the slot and turn and the stay put while jacking.

Spend the $$ on something actually shows.

Which 5 minutes are you talking about? The phone calls to find a store that sells hockey pucks (and other stores to compare prices) or the time to drive to the store and purchase the pucks. Then the drive to the hardware store for the eye bolts (5/16", 1/4'?). What length? Just buy them long and cut them off? Nuts? Threaded inserts? Locktite? Adhesive? Then the time to drill the pucks, insert the eyebolts, adjust to the correct length and install and seal the threaded inserts.

More like at least 4 hours. Ebay has them already assembled for $13.95 + shipping. I'd rather spend $22 than waste hours of my time chasing and fabricating parts.

Thread Tools

Search this Thread

Show Printable Version

Email this Page

Reply Share

First
Prev
1 / 2
Next
Last

Forum Jump