What is the Answer?
Thread Starter
Instructor
Joined: Sep 2005
Posts: 247
Likes: 0
From: Tiverton Rhode Island
What is the Answer?
I will be getting my 05 mn6 back next week after installing a procharger,
along with the procharger I have 4:10 gears. Alot of forum members say the rear end is the week link so what can be done to avoid the breakage?
along with the procharger I have 4:10 gears. Alot of forum members say the rear end is the week link so what can be done to avoid the breakage?
Pro
Joined: Mar 2006
Posts: 658
Likes: 0
From: Pa
I have 4.10's...they were great but they are a little too much with my procharger. I have 604rwhp and have problems hooking up. I also installed a C5 rear housing with hardened shafts after I blew my first rear. I am now in the process of building something 750-8--rwhp and wiil be going with an RPM trans and possibly beefed up ZO6 rear. I am still researching options....but there are many ways to go. I would check out RPM and search the forums. The rear you have should be fine if you can avoid wheelhop.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
