"Pfadt c6 tranny brace",,
Melting Slicks
Joined: May 2006
Posts: 2,891
Likes: 1
From: NJ..."the way I saw it, everyone takes a beating sometimes."
Hey George, Happy Thanksgiving.
I wasn't aware Pfadt made a tranny brace. Do you know if the rear needs to be dropped for install? I believe the DTE brace requires it.
I wasn't aware Pfadt made a tranny brace. Do you know if the rear needs to be dropped for install? I believe the DTE brace requires it.
Thread Starter
Le Mans Master
Joined: Mar 2006
Posts: 7,838
Likes: 1
From: Valencia '32 Ford 3 window with 615 HP!!!!
St. Jude Donor '06-'09
Happy Thanksgiving to You and Yours as well!
Frankie,,when I talked to Pfadt yesterday,They said You do have to "loosen" the diff a little to get it in!
I think it's a good idea,but They also said at very low speeds,there is a little more "vibration" since everything is tied together.
Take care!
G
Frankie,,when I talked to Pfadt yesterday,They said You do have to "loosen" the diff a little to get it in!
I think it's a good idea,but They also said at very low speeds,there is a little more "vibration" since everything is tied together.
Take care!
G
Thread Starter
Le Mans Master
Joined: Mar 2006
Posts: 7,838
Likes: 1
From: Valencia '32 Ford 3 window with 615 HP!!!!
St. Jude Donor '06-'09
Burning Brakes
Joined: Jan 2008
Posts: 922
Likes: 1
From: Columbus Ohio
If your interested, we have them on our black Friday sale! www.ipsmotorsports.net, click the main page and then the corvette section, save around 40-50 dollars!
As for the mounts, they take the shock out of the drive train and rear differential, the make the rear of the car feel more control able during shifting in my experiences as well. The only con, is there is a slight amount more noise, but like pfadt said only at low speeds can you even notice.
As for the mounts, they take the shock out of the drive train and rear differential, the make the rear of the car feel more control able during shifting in my experiences as well. The only con, is there is a slight amount more noise, but like pfadt said only at low speeds can you even notice.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Safety Car
Joined: Feb 2007
Posts: 4,684
Likes: 107
From: Opelika Alabama
I think he's talking about pfadt's tranny "MOUNTS" and I've been looking at them too! I'm going to do the engine mounts at the same time, I think this will help with any problems with the motor moving[twisting] more than the tranny