question about mods (cam)
Premium Supporting Vendor
Joined: Dec 1999
Posts: 1,984
Likes: 19
From: Texas Speed TX
Don't forget to search out the PRC line of cylinder heads if considering heads. We've done several LS2 cars with the TSP 228R camshaft & ported LS2 castings. You can have your heads cnc ported, valve job, decked & reassembled for $650! Outright we offer heads & cam packages for right around $1500 or so!! Power gains typically are right around 40 from the cam & 75 hp from heads cam pretty easy! 
Jason
Texas Speed
www.texas-speed.com
Jason
Texas Speed
www.texas-speed.com
Thread Starter
Drifting
Joined: Jul 2005
Posts: 1,630
Likes: 188
From: Austin TX
Jason,
Thanks for the info. You have actually been emailing over the past week about them.
Would it be more cost effective for me to send you my heads (or a set of bare heads) and have you port them and I install the hardware?
Thanks for the info. You have actually been emailing over the past week about them.
Would it be more cost effective for me to send you my heads (or a set of bare heads) and have you port them and I install the hardware?
