lingenfelter build?
Melting Slicks
Joined: Dec 2005
Posts: 2,291
Likes: 0
From: sterling ct
my .02....i would not hesistate in a second for them to build me another bottom end or another stroker short block. as for top end there are many other after market combos that make far greater horsepower for the same or less money. any good shop....cartek, ecs, vette dr's, vengeance...and the list goes on and on...can tear down and bolt together/tune your car to perfection...it is no longer a "black art" like it was in the early 90's when LPE made their name.
Drifting
Joined: Apr 2000
Posts: 1,655
Likes: 15
From: Jeffersonville In
Cruise-In I Veteran
Cruise-In II Veteran
Cruise-In III Veteran
Mike Norris Motorsports
Mike Norris Motorsports over near Orlando is also a well known and well respected Corvette Guy. I think he is also a vendor here on the forum. He wrote for Corvette Fever in the C5 solutions section for years. He would be a great choice, and close enough to get back to if a problem came up. Good Luck
Thread Starter
Racer
Joined: May 2008
Posts: 256
Likes: 0
From: Houston Texas
Mike Norris Motorsports over near Orlando is also a well known and well respected Corvette Guy. I think he is also a vendor here on the forum. He wrote for Corvette Fever in the C5 solutions section for years. He would be a great choice, and close enough to get back to if a problem came up. Good Luck
Race Director
Joined: Oct 2005
Posts: 14,555
Likes: 1,255
From: Saint Albans, WV
Living in Florida and having any warranty issue with LPE would seem to be a major obstacle to overcome. There are some in your state or closer that would seem to be a better choice than LPE. BTW, from what we read here the LPE warranty may mean absolutely nothing.
