LS2 forged rotating assemblies
Thread Starter
Drifting
Joined: Feb 2002
Posts: 1,600
Likes: 8
From: TEXAS
LS2 forged rotating assemblies
I checked LG motorsports website, nothing.. just a crank and no price.. yawn.
Texas Speed - has one with a price..
where else can I check?
I'm trying to see if I should use my block and build a 402 or if I should buy a 402 shortblock and add my stuff.
Texas Speed - has one with a price..
where else can I check?
I'm trying to see if I should use my block and build a 402 or if I should buy a 402 shortblock and add my stuff.
Thread Starter
Drifting
Joined: Feb 2002
Posts: 1,600
Likes: 8
From: TEXAS
Tech Contributor
Joined: Mar 2003
Posts: 12,094
Likes: 197
From: Colorado Springs, CO
St. Jude Donor '08-'09-'10-'11
If you're hunting price then texas speed and scoggins are not going to be beat.
Lingenfelter has a 5k 416 stroker.
Katech has the next step along with A&A or RPM motors (Charlie who build meticulous shortblocks with in house quality control. Coupled with being the owners of the business who want the product to be first rate makes them among the best.
I bought a shortblock from A&A when Charlie Williams was still with A&A and it was the best balanced motor I owned in a 700HP nitrous car.
I would choose them anyday over mass produced shortblocks. Its worth the price.
Lingenfelter has a 5k 416 stroker.
Katech has the next step along with A&A or RPM motors (Charlie who build meticulous shortblocks with in house quality control. Coupled with being the owners of the business who want the product to be first rate makes them among the best.
I bought a shortblock from A&A when Charlie Williams was still with A&A and it was the best balanced motor I owned in a 700HP nitrous car.
I would choose them anyday over mass produced shortblocks. Its worth the price.
Tech Contributor
Joined: Mar 2003
Posts: 12,094
Likes: 197
From: Colorado Springs, CO
St. Jude Donor '08-'09-'10-'11
There's scat h-beam connecting rods and there's carrillo or oliver connecting rods.
800rwhp is easy and so is 1000hp.....depends on what parts.
A&A is 3600 with no core and with even cheap parts 800rwhp is going to hold.
Former Vendor
Joined: Aug 2005
Posts: 16,897
Likes: 412
From: Lewisville TX
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13
Basic forged rotating assemblies with pistons and rings are going to start around $2495, and can vary from there.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
