Rear hub/spindle question
Thread Starter
2nd Gear
Joined: Mar 2010
Posts: 2
Likes: 0
Rear hub/spindle question
New too the forums and from sweden.
Not owning a corvette but will use covette parts for my build.
The question is if i can use C6 spindles together with C4 stubbshafts and hubs.
Have found this info about the rear bearings:
5x4.75 FlangeDia=5.689 WheelPilotDia=2.761 BrakePilotDia=2.781 FlangeOffset=1.861 HubPilotDia=3.209 Splines=27 Flange=ModifiedTriangle
Asked the question in the C4 techforum and im asking it here too for extra saftey.
Not owning a corvette but will use covette parts for my build.
The question is if i can use C6 spindles together with C4 stubbshafts and hubs.
Have found this info about the rear bearings:
5x4.75 FlangeDia=5.689 WheelPilotDia=2.761 BrakePilotDia=2.781 FlangeOffset=1.861 HubPilotDia=3.209 Splines=27 Flange=ModifiedTriangle
Asked the question in the C4 techforum and im asking it here too for extra saftey.
