Z51 Rotors Turned?
Safety Car
Joined: Feb 2002
Posts: 3,726
Likes: 368
From: Montoursville Pa
I just throw a set of pads on if the rotors aren't excessively grooved. Have been doing that for close to 40 years without turning rotors. It is even hard to find someplace that will turn rotors nowadays. Used to be that every auto parts store had the ability to turn drums and rotors. I don't know of a single store in my area that has the ability to do that now.
Bill
Bill
in addition the new process is to grind the rotors with a non directional finish, so a lathe is not the way to go
Safety Car
Joined: Jun 1999
Posts: 3,570
Likes: 3
From: Austin, Singapore, Kuala Lumpur, Houston, Dallas, Hong Kong, Elgin, etc.. Texas
I just throw a set of pads on if the rotors aren't excessively grooved. Have been doing that for close to 40 years without turning rotors. It is even hard to find someplace that will turn rotors nowadays. Used to be that every auto parts store had the ability to turn drums and rotors. I don't know of a single store in my area that has the ability to do that now.
Bill
Bill
