C6 Z06 spoiler installation
Thread Starter
Pro
Joined: Dec 2009
Posts: 687
Likes: 0
From: San Antonio Texas
C6 Z06 spoiler installation
Any write ups on the removal and reinstallation of the rear spoiler?
I will be replacing the stocker with a painted GM C6 spoiler that uses the same mounting holes.
Thanks!!!
I will be replacing the stocker with a painted GM C6 spoiler that uses the same mounting holes.
Thanks!!!
Race Director
Joined: Jan 2005
Posts: 10,924
Likes: 854
From: Daytona Beach FL
Like KneeDragr says, remove the tail lights, remove 4 nuts off the studs that hold the spoiler in place.
But.....you also need to remove the wiring harness connector to be able to remove the spoiler.
Here's a link with pics:
http://www.vettepitstop.com/faq.php
Bob
But.....you also need to remove the wiring harness connector to be able to remove the spoiler.
Here's a link with pics:
http://www.vettepitstop.com/faq.php
Bob
Thread Starter
Pro
Joined: Dec 2009
Posts: 687
Likes: 0
From: San Antonio Texas
Like KneeDragr says, remove the tail lights, remove 4 nuts off the studs that hold the spoiler in place.
But.....you also need to remove the wiring harness connector to be able to remove the spoiler.
Here's a link with pics:
http://www.vettepitstop.com/faq.php
Bob
But.....you also need to remove the wiring harness connector to be able to remove the spoiler.
Here's a link with pics:
http://www.vettepitstop.com/faq.php
Bob
