Melrose Headers
I have the Smooth Flow system, SF06RZ with cats. The quality is excellent and I love the sound

http://forums.corvetteforum.com/album.php?albumid=8763





Have you guys had any issue with corrosion/rust? I've read that some coated headers still rusted...and/or needed routine polishing to inhibit the rust.





The Best of Corvette for Corvette Enthusiasts
Here are my current pre-install thoughts:
The guys at Melrose Motorsports were very professional and polite on the phone.
Delivery open box visual inspection revealed a very smooth and consistant ceramic coating.
The poster above was correct, chromemoly headers are lighter then ss headers.
Stainless headers move more heat out of the engine compartment then plain headers, but are more prone to weld cracks, especially after many heat cycles.
Chromemoly headers weld easier, but are prone to corrosion.
Ceramic coatings move even more heat than ss, leading to a cooler engine compartment. Ceramic coatings protect chromemoly from corrosion.
In conclusion: Ceramic coated chromemoly headers = bee's knees, cat's meow, best of both words, etc.
follow the links to see the Melrose Smooth Flow long tube headers under my car (for 2 1/2 years already!) 
http://forums.corvetteforum.com/albu...ictureid=73998
http://forums.corvetteforum.com/albu...ictureid=73999





follow the links to see the Melrose Smooth Flow long tube headers under my car (for 2 1/2 years already!) 
http://forums.corvetteforum.com/albu...ictureid=73998
http://forums.corvetteforum.com/albu...ictureid=73999

















