LS3 metallurgy, materials
Thread Starter
Intermediate
Joined: Jan 2008
Posts: 37
Likes: 0
From: Central Virginia (Piedmont)
LS3 metallurgy, materials
After seeing so much about the fabulous titanium con rods, forged steel cranks, etc. on the LS9, and some of the cool stuff on the LS7, I always wondered just what the guts in my LS3 were made of. Here's a good place to find out:
http://www.pirate4x4.com/tech/billav...SPrimer/Part1/
I found this link somewhere else on the forum, but was so impressed wiht it, just thought to lay it out under another thread name.
HTH,
Bill
http://www.pirate4x4.com/tech/billav...SPrimer/Part1/
I found this link somewhere else on the forum, but was so impressed wiht it, just thought to lay it out under another thread name.
HTH,
Bill
Team Owner
Joined: Sep 2005
Posts: 20,352
Likes: 568
From: Ventura County, Calif
I've linked that article several times when someone asks about LS engine specs and differences because I can't remember all that info. 
The same article is available via Wikipedia too. 
The same article is available via Wikipedia too.
