NPP install
Thread Starter
Pro
Joined: Feb 2011
Posts: 535
Likes: 20
From: TX
NPP install
Have a 2007 non-NPP. Found a set of pristine NPP off a 2008 and this week I plan to do the install, just waiting for my NPP in a box to arrive. I know the vacuum hose goes through a hole drilled in the rear glove box, but what route does the hose take from there to the engine intake??? I did get the EZ deal to tap into the intake. Where do I tap in for electrical power???
I am sure the kit has some directions, just getting alittle antsy. Does it take longer than a day? I need to know so I can tell my Boss how many days I will be sick.
Thanks,
GRG
I am sure the kit has some directions, just getting alittle antsy. Does it take longer than a day? I need to know so I can tell my Boss how many days I will be sick.
Thanks,
GRG
Racer
Joined: Aug 2006
Posts: 372
Likes: 0
From: L.I. NY
The directions with the kit are very good. Follow and you should have no problems. Even if you work slow a few hours is all for the install including exhaust. Once you drop your old exhaust and H pipe you route vaccum tube through the tunnel I used a opened coat hanger. The electric goes under carpet upfront to the fuse panel under the passanger floor mat. Good luck.
