map light bulbs -how get out
Aug 8, 2011 | 08:01 PM
Thread Starter
Instructor
Joined: Jul 2008
Posts: 119
Likes: 1
map light bulbs -how get out
Ok so I want to change out my map light bulbs.
What is the trick to get them out?
They are in tight and don't want to break the bulb getting them out.
I can make my own brake lines but can't get a bulb out. Lol
Pathetic I know.
What is the best trick if u ran into this?
Aug 8, 2011 | 08:08 PM
Safety Car
Joined: Sep 2007
Posts: 3,502
Likes: 82
Quote:
Originally Posted by
Twisted1
Ok so I want to change out my map light bulbs.
What is the trick to get them out?
They are in tight and don't want to break the bulb getting them out.
I can make my own brake lines but can't get a bulb out. Lol
Pathetic I know.
What is the best trick if u ran into this?
slip a small zip tie around em' and pull
Aug 8, 2011 | 08:14 PM
Thread Starter
Instructor
Joined: Jul 2008
Posts: 119
Likes: 1
Thanks!
Like magic it is out.
Aug 9, 2011 | 03:22 AM
Safety Car
Joined: Dec 2007
Posts: 4,247
Likes: 7
From: Austin TX
i used a spare piece of 3/8 rubber hose and cut a 1/2 slit in it. push on, pulls right out.
2007 ,
c230 ,
c5 ,
c6 ,
corvette ,
forum ,
light ,
lightbulbs ,
lights ,
lite ,
map ,
pull ,
replace ,
replacement ,
z06