Elite Catch can install help
Thread Starter
Instructor
Joined: Apr 2011
Posts: 166
Likes: 2
Elite Catch can install help
In the process of installing the Elite Catch Can on my 2007 LS2 I purchased from Corvettes of Houston. Has anyone else had an issue with installing this without a spacer and longer bolt ? Mine came with two short bracket bolts and washers which does not allow sufficent clearance. The posted install instructions show a spacer and longer bolt. The packing slip indicates the spacer is only required for the LS3. Corvettes of Houston wanted $10.00 plus shipping for the spacer.
Drifting
Joined: Oct 2004
Posts: 1,790
Likes: 29
From: STL MO
St. Jude Donor '09-'10
I installed mine Saturday, very easy. The catch can bracket is even adjustable meaning the holes are slotted so you can move the can further away from the cylinder head.
PM me your cell number if you want me to take a couple pic's and text them to you.
John
PM me your cell number if you want me to take a couple pic's and text them to you.
John
Thread Starter
Instructor
Joined: Apr 2011
Posts: 166
Likes: 2
John,,
Thanks..I went to ACE hardware and picked up 2 spacers and longer bolts. Mine would not clear the smaller vacum/electrical connector that is adjacent / towards the top where the bracket mounts. Or at least it was too tight for my comfort. Everything is mounted now. Thanks again
Thanks..I went to ACE hardware and picked up 2 spacers and longer bolts. Mine would not clear the smaller vacum/electrical connector that is adjacent / towards the top where the bracket mounts. Or at least it was too tight for my comfort. Everything is mounted now. Thanks again
