Transmission Harness routing Pic Request
03-14-2012, 06:21 PM
#1
Safety Car
Thread Starter
Member Since: Feb 2008
Location: TEXOMA
Posts: 3,712
Likes: 0
Received 3 Likes
on
3 Posts
St. Jude Donor '08-'09
Transmission Harness routing Pic Request
ok, Long story short, thanksgiving I broke my Trans and diff. I took it out around christmas.
fast foward to now when i have some time off work and school
i have the new trans and diff up, but can't figure out the exact routing of the harness. i probley should of left the plastic (POS) clamp attached to the subframe to help me remember, or take pictures.
so if anyone has their car on jackstands, i would appreciate takeing photos of the routing of the harness and post them here or email them to me at gmail dot come
-Carl
fast foward to now when i have some time off work and school
i have the new trans and diff up, but can't figure out the exact routing of the harness. i probley should of left the plastic (POS) clamp attached to the subframe to help me remember, or take pictures.
so if anyone has their car on jackstands, i would appreciate takeing photos of the routing of the harness and post them here or email them to me at gmail dot come
-Carl
Last edited by carlrx7; 03-14-2012 at 06:24 PM.
03-14-2012, 07:32 PM
#2
Track Junky
No pics but I can tell you that there are 2 clips welded to the torque tube that the harness fits under. once the TT meets the tranny the harness branches out and around various points of the diff and tranny. Run the main part of the harness and the "arms" will naturally fall off to the sides. Plugs should be unique to each other so figuring out what gets plugged into what shouldn't be difficult.
Hope that helps a bit.
Sean
Hope that helps a bit.
Sean
03-14-2012, 08:22 PM
#3
Safety Car
03-14-2012, 08:27 PM
#4
Safety Car
Last edited by SnowyATX; 03-14-2012 at 08:31 PM.
