CEL problem
Thread Starter
Racer
Joined: Mar 2012
Posts: 388
Likes: 0
From: NC
CEL problem
on my '12 grand sport i have headers, K&N CAI and tune. i got a CEL for "system too lean" and i opened the hood and saw the problem right away. the MAF sensor came loose so i put in 2 new screws and fixed it. I have a diablosport intune and i went to clear the codes and it wont let me clear them. so first question is how should i clear the codes and why wont my intune clear them?
next question...i drove it very easy but i want to make sure it didnt hurt my motor by running to lean. was the engine actually running real lean or was it just reading that it was too lean since the MAF sensor was loose and sucking in more air? thanks for the help!
matt
next question...i drove it very easy but i want to make sure it didnt hurt my motor by running to lean. was the engine actually running real lean or was it just reading that it was too lean since the MAF sensor was loose and sucking in more air? thanks for the help!
matt
