Electrical help
Thread Starter
Advanced
Joined: Sep 2012
Posts: 92
Likes: 1
Electrical help
I purchased a 2005 corvette that was hit in the front left. In the process of getting hit the bumper got tore off and some connecteors got pulled off.
1. I need to purchase the pig tail connector that comes from the main harness to my headlight since everything got pulled of it if. Where can I find these at? My dealer was no help trying to get me the right one? Anyone have any ideas?
2. Does anyone know the pin order so when I get the pig tail end I can splice everything back in correct? The colors on the passenger side dont match the colors I have avail on driver so I can't copy it.
3. I need to re pin fog light connectors too so I'll need pigs tails for those as well.
I'm at a dead end and need some help. I can post pictures of needed.
1. I need to purchase the pig tail connector that comes from the main harness to my headlight since everything got pulled of it if. Where can I find these at? My dealer was no help trying to get me the right one? Anyone have any ideas?
2. Does anyone know the pin order so when I get the pig tail end I can splice everything back in correct? The colors on the passenger side dont match the colors I have avail on driver so I can't copy it.
3. I need to re pin fog light connectors too so I'll need pigs tails for those as well.
I'm at a dead end and need some help. I can post pictures of needed.
SUBVETTE
Joined: Jul 2006
Posts: 3,841
Likes: 93
From: San Diego CA
Go to forum vendor Gene at www.gmpartshouse.com, he should be able to help you or point you in the right direction.
Tech Contributor
Joined: Dec 1999
Posts: 32,910
Likes: 2,402
From: Anthony TX
CI 6,7,8,9,11 Vet
St. Jude Donor '08
Go to forum vendor Gene at www.gmpartshouse.com, he should be able to help you or point you in the right direction.
I will see if I can dig up the connector info you need.
BC
Drifting
Joined: Feb 2012
Posts: 1,796
Likes: 37
From: skiatook oklahoma
the connector is somewhere in this site , click on left and set proper cavities, plus male/female. really too many possible for knowing 100% you found proper one. but..... linking this anyway as a f.y.i.
http://acdelcotechconnect.com/pi/wir...cavity/female/
http://acdelcotechconnect.com/pi/wir...cavity/female/
Drifting
Joined: Feb 2012
Posts: 1,796
Likes: 37
From: skiatook oklahoma
sent you a PM and another with number xref, but see you already figured out xref from PT1448 to gm number... lol, some days i am slow... lol
i tried my best to get a pic of where that gm number fits on the car and no site shows it. but, yes, gmpartshouse shows they sell it.. so, it fits somewhere...
good luck
http://store.gmpartshouse.com/parts/...icleid=1432739
oh, on that xref PM i sent, it actually says... Headlight Wiring Harness Connector
i tried my best to get a pic of where that gm number fits on the car and no site shows it. but, yes, gmpartshouse shows they sell it.. so, it fits somewhere...
good luck
http://store.gmpartshouse.com/parts/...icleid=1432739
oh, on that xref PM i sent, it actually says... Headlight Wiring Harness Connector
Last edited by ChevyDave; Jan 6, 2013 at 11:30 PM.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
2027 Corvette vs The World: Every C8 vs Its Closest Competitor
Joe Kucinski
Tech Contributor
Joined: Dec 1999
Posts: 32,910
Likes: 2,402
From: Anthony TX
CI 6,7,8,9,11 Vet
St. Jude Donor '08
Lazy Lying bastards! They have access to ALL the schematics and have ALL the service manuals. That sucks! Tell the person that told you that info to Get off his LAZY no good for nothing fat rear end and look up the info that a 2 week graduate of basic mechanics school would know where to find it.
Since the dealer is being a *****, And you can quote me on that statement,, I'm looking up the info for you.. Stand by and I will have it shortly. I have to copy it to Photobucket...
Bill
Since the dealer is being a *****, And you can quote me on that statement,, I'm looking up the info for you.. Stand by and I will have it shortly. I have to copy it to Photobucket...
Bill
Thread Starter
Advanced
Joined: Sep 2012
Posts: 92
Likes: 1
Lazy Lying bastards! They have access to ALL the schematics and have ALL the service manuals. That sucks! Tell the person that told you that info to Get off his LAZY no good for nothing fat rear end and look up the info that a 2 week graduate of basic mechanics school would know where to find it.
Since the dealer is being a *****, And you can quote me on that statement,, I'm looking up the info for you.. Stand by and I will have it shortly. I have to copy it to Photobucket...
Bill
Since the dealer is being a *****, And you can quote me on that statement,, I'm looking up the info for you.. Stand by and I will have it shortly. I have to copy it to Photobucket...
Bill
Tech Contributor
Joined: Dec 1999
Posts: 32,910
Likes: 2,402
From: Anthony TX
CI 6,7,8,9,11 Vet
St. Jude Donor '08
PM me your e-mail address and I will take a picture of the wires on my wifes 2011 GS and get it to you!
Note! When you splice the new connector in, PLEASE take the time to do the job correctly.
Look up western union splice and follow those instructions. Make sure that you solder the joint and use a good quality heat shrink to cove the repair. Doing it that way the repair will be perment!! Hese are some good wire repair instructions:
http://blog.makezine.com/2012/02/28/...asa-standards/
Bill
Note! When you splice the new connector in, PLEASE take the time to do the job correctly.
Look up western union splice and follow those instructions. Make sure that you solder the joint and use a good quality heat shrink to cove the repair. Doing it that way the repair will be perment!! Hese are some good wire repair instructions:
http://blog.makezine.com/2012/02/28/...asa-standards/
Bill
Tech Contributor
Joined: Dec 1999
Posts: 32,910
Likes: 2,402
From: Anthony TX
CI 6,7,8,9,11 Vet
St. Jude Donor '08
If you look at the wire color on the schematic,, they match from the FUSE BLOCK to the head lamp assy. You should be able to match the connector wire to wire..