Cray Wheel problems!!!!

Reply Subscribe

Thread Tools

Search this Thread

Mar 21, 2014 | 05:27 PM

rdarmond

Thread Starter

1st Gear

Joined: Mar 2014

Posts: 1

Likes: 0

Cray Wheel problems!!!!

Need help. Have new set of Cray Manta wheels for my 2006 base conv. TSMS are mounted on inside of wheels and hit tie rod and breaks off the tip. Car is stock no mods. Stock 18x9's. Anyone have a answer? Thanks Ronnie

Mar 21, 2014 | 10:02 PM

Jrockk

Racer

Joined: Feb 2013

Posts: 406

Likes: 2

From: Agawam Mass

Gotta be the wrong offset unless your running really long valve stems

Mar 22, 2014 | 01:33 PM

96mogt

Melting Slicks

Joined: Jul 2008

Posts: 2,151

Likes: 6

From: Oceanside Ca/ Tampa FL

I ran these same exact wheels with zero issues. Possibly like Jrockk stated, wrong offset. Jay

Mar 22, 2014 | 04:31 PM

Dave S

Retired & lovin' it!

Joined: Mar 2005

Posts: 4,475

Likes: 549

From: Jackson NJ

Quote:

Originally Posted by rdarmond

Not sure what you mean by "TSMS are mounted on inside of wheel...". Maybe I'm missing something here, but if you're talking about the pressure sensors/valve stems, they're mounted on the outside of the wheel. Unless you mean the wheel weights & in that case, there should be plenty of clearance. I have the Manta's on my '05 Z51 with no clearance problems & don't recollect anything other than the standard offset. Have you called Cray to see what they say?

Attached Images

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last

Forum Jump