NPP Info needed
Thread Starter
Melting Slicks
Joined: Mar 2003
Posts: 2,928
Likes: 55
From: Port Saint Lucie, Florida
NPP Info needed
Hi
Being that l now know which system l want, l need to know the following;
2007 C6 Z-51 auto/paddle shift
What year can l use being that it will be used?
What diameter pipe? I believe my year is 2 1/2
From the tips forward what parts will l need.
Thanks
Alan
Being that l now know which system l want, l need to know the following;
2007 C6 Z-51 auto/paddle shift
What year can l use being that it will be used?
What diameter pipe? I believe my year is 2 1/2
From the tips forward what parts will l need.
Thanks
Alan
Thread Starter
Melting Slicks
Joined: Mar 2003
Posts: 2,928
Likes: 55
From: Port Saint Lucie, Florida
[QUOTE=MH663;1588973431]06-07 will also work. Be sure to get the mild 2 wild or similar controller unless you prefer to hear the drone.
[/QUOTE
I thought the NPP came out in 2008? I plan on buying the best controller that is a remote.
Why would l hear a drone?
Thanks
[/QUOTEI thought the NPP came out in 2008? I plan on buying the best controller that is a remote.
Why would l hear a drone?
Thanks
Thread Starter
Melting Slicks
Joined: Mar 2003
Posts: 2,928
Likes: 55
From: Port Saint Lucie, Florida
There is a NPP exhaust for sale now in our parts for sale section but it came off a 2012 base and is 2 1/2 inchs. The pipe diameter seems right but the year?
Please advise, it is 3 1/2 hrs from me and l will drive.
Thanks
Alan
Please advise, it is 3 1/2 hrs from me and l will drive.
Thanks
Alan
Burning Brakes
Joined: Jul 2013
Posts: 823
Likes: 7
From: Rosewood Heights IL
2012 will fit if you have an 09+ mid pipe. Diameter is not the concern, it the connection with the mid pipe. 09 changed the mid pipe shape slightly.
Thread Starter
Melting Slicks
Joined: Mar 2003
Posts: 2,928
Likes: 55
From: Port Saint Lucie, Florida
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Melting Slicks
Joined: Nov 2013
Posts: 2,587
Likes: 69
From: Memphis Tn
Melting Slicks
Joined: Nov 2013
Posts: 2,587
Likes: 69
From: Memphis Tn
Thread Starter
Melting Slicks
Joined: Mar 2003
Posts: 2,928
Likes: 55
From: Port Saint Lucie, Florida
Racer
Joined: Nov 2013
Posts: 438
Likes: 4
From: Fort Walton Beach Florida
Kingman,
If I were doing the NPP retrofit on my car I'd most likely use the sunset orange creations kit. It comes with everything to install minus the NPP mufflers obviously. They have pretty decent directions as well. I think they are a vendor on here as well. This is the kit with the separate key fob that controls the exhaust valves. They have a more expensive kit that makes it so you can use the unlock button inside the car and on the cars key fob.
http://http://shop.sunsetorangecreations.com/product.sc?productId=9&categoryId=5
If I were doing the NPP retrofit on my car I'd most likely use the sunset orange creations kit. It comes with everything to install minus the NPP mufflers obviously. They have pretty decent directions as well. I think they are a vendor on here as well. This is the kit with the separate key fob that controls the exhaust valves. They have a more expensive kit that makes it so you can use the unlock button inside the car and on the cars key fob.
http://http://shop.sunsetorangecreations.com/product.sc?productId=9&categoryId=5
Burning Brakes
Joined: Jul 2013
Posts: 823
Likes: 7
From: Rosewood Heights IL
I went with a used NPP-in-a-box kit and then made my own foot switch. The remotes were a little tacky to me. The foot switch on the dead pedal is always in the right place and easy to tap when I want them open .
Melting Slicks
Joined: Nov 2013
Posts: 2,587
Likes: 69
From: Memphis Tn
Race Director
Joined: Sep 2007
Posts: 16,557
Likes: 2,108
From: Peoria/Phoenix AZ
C6 of Year Finalist (performance mods) 2019
Thanks for reminding me about batteries. My spare remote has been laying in my toolbox for 7 years and I hope the battery is not corroded.
Melting Slicks
Joined: Nov 2013
Posts: 2,587
Likes: 69
From: Memphis Tn
Race Director
Joined: Sep 2007
Posts: 16,557
Likes: 2,108
From: Peoria/Phoenix AZ
C6 of Year Finalist (performance mods) 2019
Then I wouldn't need no stinkin old school switch.
