C6 LS2 Replacing the Lifters
Thread Starter
Navigator
Joined: Mar 2015
Posts: 9
Likes: 0
C6 LS2 Replacing the Lifters
ok guys i ordered new lifters and rockers for my 06 vette. im looking for the best how to and maybe even a video of installing them. any help would be greatly appreciated. i have lots of mechanic back ground just looking for a little info before starting on it. thanks
Safety Car
Joined: Feb 2007
Posts: 4,684
Likes: 107
From: Opelika Alabama
rockers was easy! I put crane gold race rollers on the kit included studs and locks, guide plates the lifters IS a whole "nother" world. whats wrong with your stock lifters if I may ask? I think you have to pull the heads to install lifters, meaning the "whole top end"
Last edited by CMY SIX; Apr 14, 2015 at 04:50 PM.
Thread Starter
Navigator
Joined: Mar 2015
Posts: 9
Likes: 0
i just had alot of lifter noise and wanted to make sure it had the upgrades ls7 lifters and the comp trunion uprgrades to the rockers. gonna put everything back together and double check the pushrod length and adjust the preload with a dial indicator so its 100% on the money before i go beat on it. It really easy to take the heads off and the lifters are right there. alot easier then i thought. 2 hours to tear everything down.
