Automatic Shifting problem
Thread Starter
2nd Gear
Joined: Aug 2015
Posts: 2
Likes: 0
Automatic Shifting problem
So my 2008 automatic is sitting in a parking lot at the moment. I pulled in and turned car off. When I came back out the car cranked right up but will not go into gear. I can move it between PRNDS and it will freely move between N and D without pressing on break. Anyone can help me out?
Melting Slicks
Joined: Nov 2013
Posts: 2,577
Likes: 68
From: Memphis Tn
the shifter cable has come undone either at the shifter or the tranny. you can put it in gear by moving the lever on the tranny. more than likely the cable bushing at the shifter lever is broken. its and easy fix...do a search as it has been covered numerous times.
Thread Starter
2nd Gear
Joined: Aug 2015
Posts: 2
Likes: 0
Ok joined to ask didn't think to search in search bar. Thanks
Melting Slicks
Joined: Nov 2013
Posts: 2,577
Likes: 68
From: Memphis Tn
https://www.corvetteforum.com/forums...le-repair.html
my be an 05 listed but this pertains to all c6 auto shifters
my be an 05 listed but this pertains to all c6 auto shifters
