Check engine light

Reply Subscribe

Thread Tools

Search this Thread

Nov 1, 2015 | 01:05 PM

FITZVET

Thread Starter

Advanced

Joined: Jan 2012

Posts: 99

Likes: 2

From: PHOENIX AZ.

Check engine light

Need some help guys.Check engine light on.Went to parts store and they pulled codes p0030,p0053,and p0442.Is this all from O2 sensors,fuse or what?Where do you start?Any help on this would be appreciated.2007 LS2 with LT headers and Hi flow cats.

Nov 1, 2015 | 06:58 PM

ptroxx

Race Director

Joined: Apr 2007

Posts: 14,062

Likes: 602

From: Henderson Nv-Rohnert Park/Sonoma C o. ca/born in NY Rockaway Beach.

Google is your friend...BUt I guess ill do the leg work for ya ..I got nothing else to do...JK
https://www.corvetteforum.com/forums...ror-codes.html

https://www.corvetteforum.com/forums...030-p0053.html

https://www.corvetteforum.com/forums...ght-p0442.html

this is just a few I found, but there are so many other threads out there ,,,

Last edited by ptroxx; Nov 1, 2015 at 07:04 PM.

Nov 1, 2015 | 08:09 PM

FITZVET

Thread Starter

Advanced

Joined: Jan 2012

Posts: 99

Likes: 2

From: PHOENIX AZ.

Quote:

Originally Posted by ptroxx

Thanks Ptroxx,I actually googled the codes myself.I did replace gas cap a couple of days ago,but did not remove Positive cable.Will try and let you know.Appreciate your input.Thanks.

Nov 1, 2015 | 10:41 PM

owc6

Team Owner

Joined: Apr 2013

Posts: 26,207

Likes: 4,329

From: Chirper Island

Quote:

Originally Posted by FITZVET

Thanks Ptroxx,I actually googled the codes myself.I did replace gas cap a couple of days ago,but did not remove Positive cable.Will try and let you know.Appreciate your input.Thanks.

When putting your gas cap back on, it is helpful to just get the threads engaged and PULL on the cap to tighten. Seems counterintuitive, but it really does work.

Nov 2, 2015 | 04:22 AM

FITZVET

Thread Starter

Advanced

Joined: Jan 2012

Posts: 99

Likes: 2

From: PHOENIX AZ.

Quote:

Originally Posted by owc6

When putting your gas cap back on, it is helpful to just get the threads engaged and PULL on the cap to tighten. Seems counterintuitive, but it really does work.

Thanks,I'll try that also.Never does seem like cap seats itself.

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last

Forum Jump