ride mod
Race Director
Joined: Dec 2013
Posts: 12,502
Likes: 3,631
Here you go,
http://www.mediafire.com/download/u4..._compoents.pdf
As for disabling the system, Tech II to program out F45, then unplug the F55 module before you shut the car off/ disconnect the Tech II.
Hence, the F55 has to be plugged in order for the Tech II to first discover it in F45 mode programming (tech II does not have a f55 programming mode, but the F45 mode works fine isntead) in the first place, to program it out of the car to begin with. But if the F55 module is still connected when the car starts up again, then the car will self discover it to self program it back in instead. On start up, the BCM will run a self test of the system to make sure all the modules are working fine, and self program any new modules found like the F55 module.
http://www.mediafire.com/download/u4..._compoents.pdf
As for disabling the system, Tech II to program out F45, then unplug the F55 module before you shut the car off/ disconnect the Tech II.
Hence, the F55 has to be plugged in order for the Tech II to first discover it in F45 mode programming (tech II does not have a f55 programming mode, but the F45 mode works fine isntead) in the first place, to program it out of the car to begin with. But if the F55 module is still connected when the car starts up again, then the car will self discover it to self program it back in instead. On start up, the BCM will run a self test of the system to make sure all the modules are working fine, and self program any new modules found like the F55 module.
Last edited by Dano523; Mar 13, 2016 at 01:46 AM.
Thread Starter
Intermediate
Joined: May 2015
Posts: 49
Likes: 0
ride mod
Here you go,
http://www.mediafire.com/download/u4..._compoents.pdf
As for disabling the system, Tech II to program out F45, then unplug the F55 module before you shut the car off/ disconnect the Tech II.
Hence, the F55 has to be plugged in order for the Tech II to first discover it in F45 mode programming (tech II does not have a f55 programming mode, but the F45 mode works fine isntead) in the first place, to program it out of the car to begin with. But if the F55 module is still connected when the car starts up again, then the car will self discover it to self program it back in instead. On start up, the BCM will run a self test of the system to make sure all the modules are working fine, and self program any new modules found like the F55 module.
http://www.mediafire.com/download/u4..._compoents.pdf
As for disabling the system, Tech II to program out F45, then unplug the F55 module before you shut the car off/ disconnect the Tech II.
Hence, the F55 has to be plugged in order for the Tech II to first discover it in F45 mode programming (tech II does not have a f55 programming mode, but the F45 mode works fine isntead) in the first place, to program it out of the car to begin with. But if the F55 module is still connected when the car starts up again, then the car will self discover it to self program it back in instead. On start up, the BCM will run a self test of the system to make sure all the modules are working fine, and self program any new modules found like the F55 module.
