Injector adapters??
Pro
Joined: May 2014
Posts: 678
Likes: 12
From: Middle-O-Nowhere
I completely agree. I did not realize he was swapping from bottom to top adapters.
Personally I would throw it in a Dyno and datalog it for a few pulls just to be safe. Those bottom adapters are junk IMHO.
Personally I would throw it in a Dyno and datalog it for a few pulls just to be safe. Those bottom adapters are junk IMHO.
Well that really depends. If the adapters on the bottom really messed up the spray pattern you may have some wall wetting issues that need to be addressed if you are using Deka injectors. If you are using factory GM 42lbs LS3/7 injectors than no, those have a very straight pencil spray patterns and you should be ok. Unless you are using drilled injectors, then you just kind of SOL.
Race Director
Joined: Aug 2005
Posts: 13,592
Likes: 187
From: Hudson WI
NCM Sinkhole Donor
Well that really depends. If the adapters on the bottom really messed up the spray pattern you may have some wall wetting issues that need to be addressed if you are using Deka injectors. If you are using factory GM 42lbs LS3/7 injectors than no, those have a very straight pencil spray patterns and you should be ok. Unless you are using drilled injectors, then you just kind of SOL.
Race Director
Joined: Aug 2005
Posts: 13,592
Likes: 187
From: Hudson WI
NCM Sinkhole Donor
Platinum Supporting Vendor
Joined: Sep 2001
Posts: 3,665
Likes: 341
i have them for both. pm-777 may be for the ls1/6. I will let you know monday
