Lower shifter rod bolt
Thread Starter
Burning Brakes
Joined: Feb 2010
Posts: 754
Likes: 10
From: Midway GA
Lower shifter rod bolt
Has anyone had to replace the bolt that secures the tranny shifter rod to the lower shifter box? I need to get a replacement and need the part number.
Thx
Thx
Race Director
Joined: May 2004
Posts: 16,667
Likes: 1,209
From: Raleigh, NC
St. Jude Donor '15
Race Director
Joined: May 2004
Posts: 16,667
Likes: 1,209
From: Raleigh, NC
St. Jude Donor '15
#10 is also labeled "TRANSMISSION SHIFT SHAFT LEVER ROD." So I think that will work.
I'd just try any decent M8 x 1.25 bolt from a hardware store first. Add a washer if the head isn't large enough
I'd just try any decent M8 x 1.25 bolt from a hardware store first. Add a washer if the head isn't large enough
Last edited by schpenxel; Jul 13, 2016 at 09:45 PM.
Thread Starter
Burning Brakes
Joined: Feb 2010
Posts: 754
Likes: 10
From: Midway GA
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski