C6 performance mods
Thread Starter
Navigator
Joined: Sep 2017
Posts: 9
Likes: 0
C6 performance mods
I bought a 2007 corvette 6.0 ls2 with 48k miles about 6 months ago. Everything is stock besides a Corsa axle back exhaust. I'm looking for a little more. Nothing crazy, I want to stick to bolt-ons. Just Headers, Cold air, off road x-pipe and a good tune. Any suggestions on what brands that will give me the best value without spending crazy money?
Team Owner
Joined: Sep 2005
Posts: 20,352
Likes: 568
From: Ventura County, Calif
What State do you live in? What exactly are you looking for in increased performance? Be patient for a couple days to give everyone who can offer help a chance to come by and comment. Good luck. 
Burning Brakes
Joined: Nov 2016
Posts: 783
Likes: 224
From: Chilliwack BC Canada
I bought a 2007 corvette 6.0 ls2 with 48k miles about 6 months ago. Everything is stock besides a Corsa axle back exhaust. I'm looking for a little more. Nothing crazy, I want to stick to bolt-ons. Just Headers, Cold air, off road x-pipe and a good tune. Any suggestions on what brands that will give me the best value without spending crazy money?
Last edited by Icecap; Sep 21, 2017 at 07:51 PM.
Thread Starter
Navigator
Joined: Sep 2017
Posts: 9
Likes: 0
I'm stationed in South Carolina but I'll be at my hometown in Florida in 2 years. It's going to be my weekend car so I just want it to be fast off the line. It's going to be driving the streets. Not really any plans to make it into something different than that. Just some bolt ons for now but I will end up throwing a bigger cam in it down the road. Just trying to do a couple things at a time.
Burning Brakes
Joined: Jan 2017
Posts: 1,122
Likes: 199
From: TX
If he had an LS3 or LS7 sure, but an LS2 does see decent gains from an intake, especially if accompanied with a tune. The OEM intake is terrible.
Burning Brakes
Joined: Jan 2003
Posts: 1,207
Likes: 27
From: Sun Diego CA
05 automatic LS2 here. I did a Vararam and it did next to nothing. What did work was adding a Z06 3" exhaust & tune. The car put down 356 rwhp on one of those stingy dyno's you bolt to the rear tires. Definite seat of the pants improvement.
Other than that, consider a small shot of Nitrous.
Other than that, consider a small shot of Nitrous.
Last edited by unstressed; Sep 22, 2017 at 04:27 PM.
Burning Brakes
Joined: Jan 2017
Posts: 1,122
Likes: 199
From: TX
05 automatic LS2 here. I did a Vararam and it did next to nothing. What did work was adding a Z06 3" exhaust & tune. The car put down 356 rwhp on one of those stingy dyno's you bolt to the rear tires. Definite seat of the pants improvement.
Other than that, consider a small shot of Nitrous.
Other than that, consider a small shot of Nitrous.
Pro
Joined: Nov 2016
Posts: 647
Likes: 103
From: Aurora IL
05 automatic LS2 here. I did a Vararam and it did next to nothing. What did work was adding a Z06 3" exhaust & tune. The car put down 356 rwhp on one of those stingy dyno's you bolt to the rear tires. Definite seat of the pants improvement.
Other than that, consider a small shot of Nitrous.
Other than that, consider a small shot of Nitrous.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Burning Brakes
Joined: Apr 2016
Posts: 1,120
Likes: 110
From: Chattanooga TN
Hinson Headers is very budget friendly.
https://www.hinsonsupercars.com/p-86...pes-black.aspx
Texas Speed is very budget friendly also all 304 stainless
http://www.texas-speed.com/p-3198-te...xtensions.aspx
https://www.hinsonsupercars.com/p-86...pes-black.aspx
Texas Speed is very budget friendly also all 304 stainless
http://www.texas-speed.com/p-3198-te...xtensions.aspx
Thread Starter
Navigator
Joined: Sep 2017
Posts: 9
Likes: 0
What tune would you recommend for just a full header back exhaust and a CAI? I have some 305s for the rear and 265s for the front coming in too. I heard Diablosport is a good one. I have the Intune but its for a 2013 ram 1500 that I had prior to the corvette. Don't think it would work for GM vehicles.
Thread Starter
Navigator
Joined: Sep 2017
Posts: 9
Likes: 0
!
Hinson Headers is very budget friendly.
https://www.hinsonsupercars.com/p-86...pes-black.aspx
Texas Speed is very budget friendly also all 304 stainless
http://www.texas-speed.com/p-3198-te...xtensions.aspx
https://www.hinsonsupercars.com/p-86...pes-black.aspx
Texas Speed is very budget friendly also all 304 stainless
http://www.texas-speed.com/p-3198-te...xtensions.aspx
Le Mans Master
Joined: Oct 2014
Posts: 8,673
Likes: 2,728
From: Atlanta GA
05 automatic LS2 here. I did a Vararam and it did next to nothing. What did work was adding a Z06 3" exhaust & tune. The car put down 356 rwhp on one of those stingy dyno's you bolt to the rear tires. Definite seat of the pants improvement.
Other than that, consider a small shot of Nitrous.
Other than that, consider a small shot of Nitrous.
Last edited by Dcasole; Sep 25, 2017 at 08:09 PM.
Le Mans Master
Joined: Oct 2014
Posts: 8,673
Likes: 2,728
From: Atlanta GA
What tune would you recommend for just a full header back exhaust and a CAI? I have some 305s for the rear and 265s for the front coming in too. I heard Diablosport is a good one. I have the Intune but its for a 2013 ram 1500 that I had prior to the corvette. Don't think it would work for GM vehicles.
if you have an auto the TCM tune is great
Dave
