Custom Overflow tank
Thread Starter
Racer
Joined: Dec 2014
Posts: 476
Likes: 14
From: Menifee CA
Custom Overflow tank
So Ive been working on tidying up my engine bay and the next ugly thing i'd like to tackle is the stock overflow. Racetronix just came out with a radiator cap adapter that looks like it could come in use in changing out the stock c6 overflow for something more eye friendly.
I was thinking about doing this cap on one of their catch can/storage tanks. Does anyone see a problem with doing so? I know the stock system holds quite a bit and this would be downsizing it some, but I do have an aftermarket radiator that holds probably twice that of the stock unit fluid wise. With the cap and adapter I would still keep the system pressurized.
Any input from the CF crew?
I was thinking about doing this cap on one of their catch can/storage tanks. Does anyone see a problem with doing so? I know the stock system holds quite a bit and this would be downsizing it some, but I do have an aftermarket radiator that holds probably twice that of the stock unit fluid wise. With the cap and adapter I would still keep the system pressurized.
Any input from the CF crew?
Last edited by GaragedLS2; Feb 8, 2018 at 05:25 PM.
Thread Starter
Racer
Joined: Dec 2014
Posts: 476
Likes: 14
From: Menifee CA
This is the only thing I can find thats a direct aftermarket replacement. I'm just not sold on it as of now.
http://www.jegs.com/i/Moroso/710/637...iABEgJYLPD_BwE
http://www.jegs.com/i/Moroso/710/637...iABEgJYLPD_BwE
Last edited by GaragedLS2; Feb 12, 2018 at 11:15 AM.
