No Start
Moderator, Tech Contributor
Joined: Sep 2013
Posts: 15,628
Likes: 4,071
From: Cape Coral, Florida
Are you still not getting spark or fuel ??...you said you changed the CKP sensor..,did you check the wiring as I had suggested ???...I’ll NEVER replace a part unless I check “power and grounds” !!!...this morning I did a crank/cam correlation with my labscope to get a good known waveform for my waveform library...what a PITA !!...had to pick the 2 signal wires at the PCM...my crank is a 24X and cam is a 1X.
Last edited by C5 Diag; Jul 14, 2018 at 09:36 PM.
Thread Starter
Burning Brakes
Joined: Feb 2013
Posts: 1,021
Likes: 52
From: Coral Springs, FL
Originally Posted by rwobs777
Are you still not getting spark or fuel ??...you said you changed the CKP sensor..,did you check the wiring as I had suggested ???...I’ll NEVER replace a part unless I check “power and grounds” !!!...this morning I did a crank/cam correlation with my labscope to get a good known waveform for my waveform library...what a PITA !!...had to pick the 2 signal wires at the PCM...my crank is a 24X and cam is a 1X.
