AC Delco or parts store brand for front crank seal?
#1
Burning Brakes
Thread Starter
AC Delco or parts store brand for front crank seal?
I am replacing my front crank seal while replacing the harmonic balancer. I was going to try to finish up tomorrow but can't get an AC Delco brand crank seal, the only brand is National Oil Seal.
Does everyone use AC Delco or are other brands okay? I want to do it right because it is such a pain to do this job.
Thanks,
Shawn
Does everyone use AC Delco or are other brands okay? I want to do it right because it is such a pain to do this job.
Thanks,
Shawn
#2
Team Owner
Member Since: Dec 2012
Location: Outside the Quick Stop N.J.
Posts: 30,426
Received 1,596 Likes
on
1,074 Posts
FWIW, I just put a "store brand" front crank seal in my Fiero, and it is leaking. Thankfully it is nowhere near as hard to replace as a C6 one, but I am still not happy about it.
#3
Burning Brakes
Thread Starter
Thanks, I think I will wait for the AC Delco seal. Trying to get it done before the Bash at the museum.
What year Fiero do you have? I have an 87 GT with t-tops.
What year Fiero do you have? I have an 87 GT with t-tops.
#4
Team Owner
Member Since: Dec 2012
Location: Outside the Quick Stop N.J.
Posts: 30,426
Received 1,596 Likes
on
1,074 Posts
#6
Team Owner
Member Since: Dec 2012
Location: Outside the Quick Stop N.J.
Posts: 30,426
Received 1,596 Likes
on
1,074 Posts
Thanks, I was looking for a manual, although I would have preferred a 5 spd. I just missed out on a 5 spd/sbc one on Ebay, that thing must be insane to drive.
I pulled the balancer off today, the seal looked fine, my guess is that the balancer itself has to be sleeved. I have to call The Fiero Store and see if it was a new or reman balancer, my guess is on a reman and they machined the snout to clean it up.
So lets see some pics of yours.
I pulled the balancer off today, the seal looked fine, my guess is that the balancer itself has to be sleeved. I have to call The Fiero Store and see if it was a new or reman balancer, my guess is on a reman and they machined the snout to clean it up.
So lets see some pics of yours.