LS3 Balancer DIY guide here?
Thread Starter
Burning Brakes
Joined: Oct 2003
Posts: 1,079
Likes: 13
From: east norriton pa
LS3 Balancer DIY guide here?
I have a horrible squeaking sound and visible balancer wobble (08 34K miles). I have some PTO i have to burn, so I figured I would do before before a total failure, and it gets too hot out. Is there a DIY guide here for the LS3? I know when i did pullies on my camaro, it was easy to just get under the car and remove, but the corvette seems to be like a lot of extra work for such a simple task. I want to make sure I get it all
thanks again
EDIT, when i search for it, i see the same posts of costs and what replacements, but not an actual DIY
thanks again
EDIT, when i search for it, i see the same posts of costs and what replacements, but not an actual DIY
Last edited by Jimmy 2 Times; Jun 13, 2020 at 07:17 PM.
Drifting
Joined: Aug 2008
Posts: 1,494
Likes: 146
From: Saint John's, Florida
I have a horrible squeaking sound and visible balancer wobble (08 34K miles). I have some PTO i have to burn, so I figured I would do before before a total failure, and it gets too hot out. Is there a DIY guide here for the LS3? I know when i did pullies on my camaro, it was easy to just get under the car and remove, but the corvette seems to be like a lot of extra work for such a simple task. I want to make sure I get it all
thanks again
EDIT, when i search for it, i see the same posts of costs and what replacements, but not an actual DIY
thanks again
EDIT, when i search for it, i see the same posts of costs and what replacements, but not an actual DIY
