Brake hardware question
Thread Starter
Melting Slicks
Joined: Aug 2014
Posts: 2,470
Likes: 460
From: East Windsor NJ
Brake hardware question
Hello - I'm a C5'er doing the C6Z brake upgrade. Seems that I need the "hardware kit" for fitting the pads - looking at the selection below there is ACDELCO 18K15355 and also ACDELCO 18K980X - curious if these might be different part numbers for base brakes vs C6Z brakes? Also the pins (ACDELCO 18K15354) - these are the same for Base and Z06 models? Thanks!
2006 CHEVROLET CORVETTE 6.0L V8 Disc Brake Hardware Kit | RockAuto
2006 CHEVROLET CORVETTE 6.0L V8 Disc Brake Hardware Kit | RockAuto
Melting Slicks
Joined: Jan 2000
Posts: 3,326
Likes: 523
From: home
You'll need the raybestos 354, and 355 pins if doing front and rear calipers and these: https://www.rockauto.com/en/catalog/...ing+clip,12737
