Jacking Pucks
Safety Car
Joined: Jul 2004
Posts: 3,867
Likes: 307
From: Wantagh,L.I. New York
Originally Posted by SEA6
Does anyone know if the C6 uses the same slots in the frame as the C5 does and will the C5 Jacking Pucks work in the C6 
Thread Starter
Racer
Joined: Apr 2004
Posts: 326
Likes: 0
From: Lake County Sunny Central Florida.....
Originally Posted by c6vette
When my C6 was delivered on Wed. it was put on the dealers lift. The mechanic showed me the 4 holes /lift points. He said they were the same size as the C5-so I guess the answer would be yes. Puck will fit!
That is what I was hoping.. Good luck and many happy
miles
Thread Starter
Racer
Joined: Apr 2004
Posts: 326
Likes: 0
From: Lake County Sunny Central Florida.....
Originally Posted by LS WON
So what happens if you don't use those pucks before putting the Corvette up on the rack?
Without the pucks or some other spacer the glass body panel can be damaged were it covers the frame when lifted.
Have a look at the links below
http://www.madvet.com/shop?frame=1.174
http://www.idavette.net/hib/C5diy/c5diy1.htm
Team Owner
Joined: Dec 2002
Posts: 32,074
Likes: 296
From: San Francisco CA
Originally Posted by SEA6
Without the pucks or some other spacer the glass body panel can be damaged were it covers the frame when lifted.
Have a look at the links below
http://www.madvet.com/shop?frame=1.174
http://www.idavette.net/hib/C5diy/c5diy1.htm
Have a look at the links below
http://www.madvet.com/shop?frame=1.174
http://www.idavette.net/hib/C5diy/c5diy1.htm
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
2027 Corvette vs The World: Every C8 vs Its Closest Competitor
Joe Kucinski
Thread Starter
Racer
Joined: Apr 2004
Posts: 326
Likes: 0
From: Lake County Sunny Central Florida.....
Originally Posted by LS WON
Where can I purchase these pucks?
places you can purchase the pucks. I purchased mine for the C5 at
Forum vendor LAPD. Give them a call, I am sure they will confirm
weather or not they will work. Let us know what you learn ...
http://www.thelapd.com/Merchant2/mer...e_Code=thelapd
http://www.thelapd.com/Merchant2/mer...egory_Code=ptc
http://www.thelapd.com/Merchant2/mer...egory_Code=ptc
Last edited by SEA6; Oct 4, 2004 at 08:43 AM.
Team Owner
Joined: Dec 2002
Posts: 32,074
Likes: 296
From: San Francisco CA
Originally Posted by SEA6
Assuming that c6vette is correct that they will fit, there are several
places you can purchase the pucks. I purchased mine for the C5 at
Forum vendor LAPD. Give them a call, I am sure they will confirm
weather or not they will work. Let us know what you learn ...
http://www.thelapd.com/Merchant2/mer...e_Code=thelapd
http://www.thelapd.com/Merchant2/mer...egory_Code=ptc
http://www.thelapd.com/Merchant2/mer...egory_Code=ptc
places you can purchase the pucks. I purchased mine for the C5 at
Forum vendor LAPD. Give them a call, I am sure they will confirm
weather or not they will work. Let us know what you learn ...
http://www.thelapd.com/Merchant2/mer...e_Code=thelapd
http://www.thelapd.com/Merchant2/mer...egory_Code=ptc
http://www.thelapd.com/Merchant2/mer...egory_Code=ptc
Safety Car
Joined: Mar 1999
Posts: 3,630
Likes: 8
From: Virginia Beach Virginia
There is another option...pick up lifting pads/pucks from your local BMW dealer (for the 3 series)...they cost about $35 for four of them and you can permanently mount them (they snap right in) and they have lower profile so that you have to get on the ground to actually see them. This way you don't have to worry about taking your vehicle in and ensuring that the tech uses the proper pads or that he put in the ones you've asked him to use...these will save you a lot of headaches.
Team Owner
Joined: Dec 2002
Posts: 32,074
Likes: 296
From: San Francisco CA
Originally Posted by Mark S.
There is another option...pick up lifting pads/pucks from your local BMW dealer (for the 3 series)...they cost about $35 for four of them and you can permanently mount them (they snap right in) and they have lower profile so that you have to get on the ground to actually see them. This way you don't have to worry about taking your vehicle in and ensuring that the tech uses the proper pads or that he put in the ones you've asked him to use...these will save you a lot of headaches.
