i too, would like to know.
Looking for C6 harness bar
Team Owner
Joined: Sep 2003
Posts: 43,084
Likes: 33
From: Raleigh / Rolesville NC
Contact Gary or Dennis at HardBar. They just did the SEMA show and put a harness bar in a C6.
Hardbar is a supporting vendor on CV.
Here are som pictures of their work at the SEMA show and Phil McClures very cool Speedworld Challange Corvette
http://forums.corvetteforum.com/showthread.php?t=940874
Hardbar is a supporting vendor on CV.
Here are som pictures of their work at the SEMA show and Phil McClures very cool Speedworld Challange Corvette
http://forums.corvetteforum.com/showthread.php?t=940874
Moderator
Joined: Jan 2001
Posts: 17,124
Likes: 3,759
From: Charlotte NC
Cruise-In IV Veteran
Cruise-In V Veteran
St. Jude Donor '08-'25
I would also suggest Dave Cooper at RD Racing. He is also a supporting vendor, has several years of racing experience and is about one of the nicest guys you could ever meet. I'm very happy with my Cross Bar, Camera Mounts and Belts. 
Thread Starter
Racer
Joined: Feb 2002
Posts: 257
Likes: 0
From: Dallas Texas
Dave Cooper (RD Racing) is trying to find a C6 to get into the shop to proto-type off of so it will be a quite a while before RD Racing has anything available.
Maybe someone nearby Dave's shop could volunteer their C6...you know, take one for the team!
I haven't heard anything from Brey Krause, and I can't find and e-mail for HardBar.
Maybe someone nearby Dave's shop could volunteer their C6...you know, take one for the team!
I haven't heard anything from Brey Krause, and I can't find and e-mail for HardBar.
Team Owner
Joined: Sep 2003
Posts: 43,084
Likes: 33
From: Raleigh / Rolesville NC
Former Vendor
Joined: Feb 2004
Posts: 9,615
Likes: 13
From: Burlington NC
vespa-vette,
We have a chassis bar for the C-6. It is almost the same as our C5 bars. It is a weld in and takes some time to install. If you need some pics, e-mail and I will reply with some pics.
Thanks
Randy
drm@tcinternet.net
dougrippie.com
We have a chassis bar for the C-6. It is almost the same as our C5 bars. It is a weld in and takes some time to install. If you need some pics, e-mail and I will reply with some pics.
Thanks
Randy
drm@tcinternet.net
dougrippie.com
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
Thread Starter
Racer
Joined: Feb 2002
Posts: 257
Likes: 0
From: Dallas Texas
Randy:
Thanks for the info on the chassis bar from www.dougrippie.com.
I'm just a weekend autocrosser/roadracer and I'm looking for a bolt-in solution that I can do at home without welding.
Everyone:
Dennis Bauer with "HardBar" e-mailed me and stated that the harness bar featured in their car at SEMA was a prototype and that the production process of the bar, etc. had not yet been finalized. So no pricing or availibility yet.
I still haven't heard anything from Brey Krause.
Thanks for the info on the chassis bar from www.dougrippie.com.
I'm just a weekend autocrosser/roadracer and I'm looking for a bolt-in solution that I can do at home without welding.
Everyone:
Dennis Bauer with "HardBar" e-mailed me and stated that the harness bar featured in their car at SEMA was a prototype and that the production process of the bar, etc. had not yet been finalized. So no pricing or availibility yet.
I still haven't heard anything from Brey Krause.