C7 nitrous
Thread Starter
Instructor
Joined: Oct 2013
Posts: 134
Likes: 1
From: McAllen Texas
C7 nitrous
We are about to install a NX nitrous kit in my buddies C7. Just wondering how you all route your nitrous line. Through the interior or under the car...any cutting or drilling holes required etc?
Pro
Joined: Oct 2008
Posts: 606
Likes: 7
From: Nashville, TN
I don't have N2O but I have methanol injection and routed the wires from the hatch area inside the car along the drivers door jamb and drilled a hole in the firewall beside the hood release cable grommet. You will need to take off the drivers front wheel and wheel liner and then can then route the lines up beside the windshield washer tank tube. Good luck.
Supporting Vendor
Joined: Feb 2009
Posts: 4,421
Likes: 1,430
From: Mesa Az
to be track legal the nitrous line needs to be outside the car. on c7's we run it in the rocker panel.
__________________
Cordes Performance Racing aka "CPR"
Owner of AZ's premier LSX/LTX motorsports shop
http://cordesperformanceracing.com/
www.facebook.com/cordesperformanceracing.com
joe@cordesperformanceracing.com
480-359-5914
Cordes Performance Racing aka "CPR"
Owner of AZ's premier LSX/LTX motorsports shop
http://cordesperformanceracing.com/
www.facebook.com/cordesperformanceracing.com
joe@cordesperformanceracing.com
480-359-5914
